Advertisement
How to Use
１．Connect the Document Camera, Computer and Projector.
For information on how to connect them together, refer to the user's manuals of the respective devices.
●Using with L-12iD
２．Connect the wireless adapter to L-12iD or computer.
A wireless adapter button flashes in blue.
Flashes in blue
３．Attach the sensor to the projection surface.
Make sure to attach the sensor in parallel
with the projection surface, aligning the
center of the sensor with the center of the
projection surface.
If the magnet does not stick to the
projection surface, use the attachment
plate and the double-sided tape to attach
the sensor as shown in the figure.
Attachment plate
Sensor
Double-sided tape
Projection surface
◆Using with Computer / Document Camera
※ELMO Interactive Toolbox needs to be installed
on your computer in advance. ( ⇒ P21 )
Flashes in blue
Projection surface
Sensor
(Max. H 1.38m x W 1.83m)
9cm
19
Blackboard/Whiteboard etc
Center
Projector
Advertisement
