Sears Craftsman 149.213340 Owner's Manual page 5

TOOLS REQUmRED
8-inch Adjustable
Mallet Wrench
UNPACKRNG AND CHECKUNG CONTENTS
Model 149213340 Radial Drill Press is shipped complete in one
carton Carefully unpack and separate parts from packing material
Check loose parts against Table of Loose Parts on page 5 and parts
list on page 15 If any parts are missing or damaged, do not attempt
to assemble Radial Drill Press, plug in power cord or turn on power
switch until replacement parts are obtained and properly installed
Some parts such as the table and base are coated with rust preven-
tative that can be removed with a soft cloth soaked in kerosene Do
not use acetone, gasoline, or lacquer thinner; these are dangerous
and may also damage the plastic and rubber parts of the Radial Drill
Press
Apply a coating of paste wax to the table and base work surfaces
I
TABLE OF LOOSE PARTS
REF
NO. DESCRIPTION QTY.
1 Base Assembly 1
4 CoIumn and Flange Assembly 1
5 M8 x 25mm Hex Head Bolls 4
6 & !6 Table Bracket and Table 1
9 Worm Pinion 1
15 Vertical Rack 1
10 Lig Handle 1
-- Drill Head Assembly 1
!4 Lock Handles 3
37 & 38 Handle Bars and Knobs 3
46 Chuck and Key 1
96 5/16-18 x 5" Carriage Bolts 2
97 5/16-18 Wing Nuts 2
95 Owner's Manual (not shown) 1
98 5/32" Hex Handle 1
99 3mm Hex Handle 1
88 Lock Shoe wilh Recess 1
46
Drill Head
15