With Audio Equipment - Sears 274.4394859 Owner's Manual

Using Your TV and Remote
With Audio Equipment: Programming and Basic Operation
Refer to the Connection Book or your Audio equipment owner's manual to hook
up your audio equipment. Your remote controls some audio equipment such
as a radio, CD player, tape player, turntable, or amplifier. The remote may
need to be programmed for your equipment, but may not operate all
models of the brands listed below. Use the codes below or on the sheet packed
in with your remote.
Program the remote for
audio equipment
Basic Operation
Audio Codes
RCA/Dimensia .:1
AM/FM ...........................03 I:
CD ....................................07 }"
Tape .................................06 liii
Phono ..............................05
90_E _ VCRI SAToCABL E TV
VCR2°LD
AUDIO
OQ
REW PLAY FF
REC SlOP PAUSE
DISPLAY SKiP
MUTE CHA_4 PREV CH
A. Point the remote at the audio
equipment and hold AU DID.
B. Enter the code from the code
list.
C. Release AUDIO.
D. Press POWER to turn it on. If
nothing happens, try pressing
AUDIO and then POWER.
E. Repeat A-D with another code
if the first one does not work.
a.
B.
C.
D.
Point the remote at the audio
equipment and press AUDIO.
Press POWER to turn it on.
Use the buttons on the remote
that relate to audio functions.
Not all buttons highlighted
may work with your
equipment.
Turn the audio equipment off
using the audio component's
power off button.
15