Using Your Tv And Remote With Remote Buttons - Sears 274.42418390 Series Owner's Manual

Using Your TV and Remote
With Remote Buttons
1.
Power Buttons
POWER
Turns the TV off.
Turns the TV on.
2. TV Buttons
PREV CHAN (Previous Channel)
Changes back and forth between
two channels.
Select a channel and then select
another. Press PREV CHAN to
switch between the two channels.
DISPLAY
Shows displays on the screen.
Clears menus from the screen.
MUTE
Reduces the TV sound.
CHAN (Channel)
Scans up and down through
channels in the TV's memory.
Moves up and down menus. See
Menu Basics on page 5.
VOL/Volume
Raises and lowers sound.
Moves left and right on a menu
line. See Menu Basics on page 5.
Changes a feature setting.
MENU
Shows menus on screen and moves
from menu to menu.
RESET
Returns the picture adjustments to
the original settings.
DONE
Saves the setup of a feature.
INPUT
Switches between the TV channels
and VIDEO 00/S-VIDEO 00.
SKIP:30 (Commercial Skip)
Allows you to scan other channels
during commericals.
Each press adds 30 seconds. TV
switches back to original channel
when time runs out. Press CLEAR
to cancel SKIP.
3.
Number Buttons
(0-9)
Selects any channel number.
Two numbers must be pressed for
each channel. Press 0 and 6 for
channel 6.
For three digit channels, press and
hold 1 until 1-- appears on the
screen. Then press the other two
numbers.