Table of Contents
Advertisement
Quick Guide to Your TV
Startup
5. Adjust
PICTURE
TILT.
Picture tilt is used to correct a
tilted picture from the effect of the
Earth's magnetic
field on a large
picture tube. The PICTURE TILT
STRENGTH
and POLARITY
switches
on the back of the TV
compensate
for this effect. If the
picture appears
tilted, follow these
steps to improve
it.
You may need to reset the
switches if the TV is moved or
repositioned
in the room.
BACK OF TV
OFF
HIGH
LOW
POLARITY
STRENGTH
PICTURE TILT
A. Make sure STRENG'IH
switch is
in the OFF position.
B. Move STRENGTH
switch to the
LOW position.
If this does not
fully improve
tilt, move
STRENGTH
switch to HIGH.
This should correct tilt. If moving
STRENGTH
switch makes tilt
worse, return it to OFF and go to
the next step.
C. Change
the position
of
POLARITY
switch.
If this
improves
the tilt but does not
fully improve
it, move the
STRENGTH
switch to LOW or
HIGH.
This should correct tilt.
6. Place all available
channels
in memory
(Autoprogram)
Details for adding and deleting
channels are on page 20.
Controls
Alarm
Ad
13
A. Press MENUopROG until the
Setup menu is selected.
This
menu is white.
B.
C.
Do
Press MOVE • to highlight
Autoprogram.
Press MOVE I_ to start placing
channels
in the TV's memory.
Wait until TV has cycled
through
all the channels
and
returns to original
channel.
7. Set the Time
12:21 AM
13
A. Press MENUopROG until the
Alarm menu is selected. This
menu is green.
B. The Clock is automatically
highlighted
the first time you set
it. If it is not, press MOVE • to
highlight
it.
C. Press MOVE • to set the hour.
D. Press MOVE 1_ to set the minutes.
Advertisement
Table of Contents
