Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for TelcoBridges TSBC Series
Summary of Contents for TelcoBridges TSBC Series
- Page 1 TSBC Series Installation Guide TSBC-HW August 1, 2017...
- Page 2 SRV-MID, TSBC-HW-TRANS, TSBC-HW-TRANS-1372, TSBC-HW-TRANS-2744, Tdev, TMP800, TMP6400, TMP6400- CTRL, TMP6400-TMS, Tmonitor, TM1000, TM3000, Toolpack, Toolpack API, TB640, TB-8, TB-16, and TB-Video, are trademarks of TelcoBridges Inc. All other trademarks are the property of their owners. This information is subject to change without notice.
- Page 3 Preface About this Guide This guide provides installation, and setup procedures for the TSBC-HW. Conventions Terminology Description TSBC-HW This term is used when a description applies to both a TSBC-HW-SRV and TSBC- HW-TRANS. TSBC-HW-SRV This term is used when a description applies to a TSBC-HW-SRV-HIGH and TSBC- HW-SRV-MID.
- Page 4 TSBC Series System Installation Guide Contact Us If you have comments about this guide or any other TelcoBridges technical documentation, please send an email to marketing@telcobridges.com.
-
Page 5: Table Of Contents
Section 1 Introduction........................1 Identifying the TSBC-HW Equipment ..................2 1.1.1 TSBC-HW-SRV ........................2 1.1.2 TSBC-HW-TRANS ......................4 Installation Prerequisites .....................5 1.2.1 TSBC-HW-SRV ........................5 1.2.2 TSBC-HW-TRANS ......................6 Preventing Electrostatic Discharge Damage...............8 Recommended Reading......................8 Section 2 Installation Preparation..................... 9 Package Contents ......................10 2.1.1 TSBC-HW-SRV-HIGH.......................10 2.1.2 TSBC-HW-SRV-MID ......................10 2.1.3... - Page 6 TSBC Series System Installation Guide 5.2.2 TSBC-HW-TRANS ......................33 Section 6 Powering Down the Equipment ..................35 TSBC-HW-SRV .........................35 6.1.1 Local Method........................35 6.1.2 Remote Method.........................35 TSBC-HW-TRANS ......................35 Section 7 Initial System Configuration.................... 37 TSBC-HW-SRV SSH Connection ..................38 TSBC-HW-SRV Serial Connection..................38 7.2.1 Connecting to the TSBC-HW-SRV Console..............38...
-
Page 7: Introduction
Section 1 Introduction This section provides an introduction to the installation and setup of a TSBC-HW: The following topics are covered: • Section 1.1 “Identifying the TSBC-HW Equipment” • Section 1.2 “Installation Prerequisites” • Section 1.3 “Preventing Electrostatic Discharge Damage” •... -
Page 8: Identifying The Tsbc-Hw Equipment
TSBC Series System Installation Guide Identifying the TSBC-HW Equipment The TSBC-HW is comprised of the following equipment: • TSBC-HW-SRV • TSBC-HW-TRANS 1.1.1 TSBC-HW-SRV The TSBC-HW-SRV is available in two models: • TSBC-HW-SRV-HIGH, (figure 1.1 on page 3) • TSBC-HW-SRV-MID, (figure 1.2 on page 4) - Page 9 Introduction TSBC-HW-SRV-HIGH (front view) TSBC-HW-SRV-HIGH 1Gb (rear view) AC Power Supply TSBC-HW-SRV-HIGH 1Gb (rear view) DC Power Supply TSBC-HW-SRV-HIGH 10 Gb (rear view) AC Power Supply TSBC-HW-SRV-HIGH 10 Gb (rear view) DC Power Supply Figure 1.1 TSBC-HW-SRV-HIGH For information about the TSBC-HW-SRV-HIGH, refer to Dell’s documentation: http://www.dell.com/support/home/us/en/19/product-support/product/poweredge-r630/manuals TSBC-HW-SRV-MID Characteristics...
-
Page 10: Tsbc-Hw-Trans
TSBC Series System Installation Guide TSBC-HW-SRV-MID (front view) TSBC-HW-SRV MID 1Gb (rear view) AC Power Supply TSBC-HW-SRV- TSBC-HW-SRV-MID 10 Gb (rear view) AC Power Supply Figure 1.2 TSBC-HW-SRV-MID For information about the TSBC-HW-SRV-MID, refer to Dell’s documentation: http://www.dell.com/support/home/us/en/04/product-support/product/poweredge-r330/manuals 1.1.2 TSBC-HW-TRANS The TSBC-HW-TRANS, shown in figure 1.3 on page 4, is available in two models:... -
Page 11: Installation Prerequisites
Introduction Installation Prerequisites For the installation to proceed without interruption, it is important that you verify that you have all necessary materials on hand. A TSBC-HW system can range in size from 1 to 18U is vertical rack space at full capacity TSBC-HW-SRV TSBC-HW-SRV TSBC-HW-SRV... -
Page 12: Tsbc-Hw-Trans
TSBC Series System Installation Guide • Height x Width x Depth (inch) 1.68 x 18.98" x 29.72" The dimension of the TSBC-HW-SRV-MID (without bezel and redundant power supply) • Height x Width x Depth (mm) 42.8 x 434.0 x 625.0 •... - Page 13 Introduction To guarantee an uninterrupted supply of electricity, each power connection must be fed by a dedicated power source.
-
Page 14: Preventing Electrostatic Discharge Damage
This document assumes that you have a clear understanding of the installation of the equipment described in this document and have been trained to work with the equipment.If you have any technical questions, TelcoBridges TB Support (technical support team) can be reached at the following numbers or an email can be sent to: support@telcobridges.com. -
Page 15: Installation Preparation
Installation Preparation Section 2 Installation Preparation This section provides information about the following topics: • Section 2.1 “Package Contents” • Section 2.2 “Rack Mounting the TSBC-HW Equipment”... -
Page 16: Package Contents
In the box, you will find the following items: • One Dell PowerEdge R630, (http://www.dell.com/support/home/us/en/19/product- support/product/poweredge-r630/manuals) • One TelcoBridges Important Notice (pertinent product serial numbers and other important information). • One set of static rails and associated installation hardware. • One packing slip. -
Page 17: Tsbc-Hw-Trans1372/Tbsc-Hw-Trans-2744
Installation Preparation 2.1.3 TSBC-HW-TRANS1372/TBSC-HW-TRANS-2744 In the box, you will find the following items: • One TSBC-HW-TRANS unit (TSBC-HW-TRANS-1372 or TSBC-HW-TRANS-2744). See figure 1.3 on page 4. • One set of mounting brackets and screws, used to mount the TSBC-HW-TRANS unit to a 19" rack. •... -
Page 18: Rack Mounting The Tsbc-Hw Equipment
TSBC Series System Installation Guide Rack Mounting the TSBC-HW Equipment The TSBC-HW equipment is mounted on a customer provided equipment rack using the mounting hardware packaged in each box. 2.2.1 Prerequisites To rack mount the equipment, you will need: •... -
Page 19: Installing The Tsbc-Hw-Srv On An Equipment Rack
Installation Preparation TSBC-HW-SRV 2.2.3 Installing the on an Equipment Rack The TSBC-HW-SRV and TSBC-HW-TRANS are mounted on a 19" equipment rack using the angle brackets and screws provided in the box. 2.2.3.1 TSBC-HW-SRV To install the TSBC-HW-SRV-HIGH or TSBC-HW-SRV-MID on the equipment rack, refer to either the static or sliding rails installation Instructions in the following Dell documents: •... - Page 20 TSBC Series System Installation Guide...
-
Page 21: Installing The Tsbc-Hw-Srv
Installing the TSBC-HW-SRV Section 3 Installing the TSBC-HW-SRV This section covers the following procedures: • Section 3.1 “Connecting to the TSBC-HW-SRV Management Interface” on page 16. • Section 3.2 “Connecting to the Control Network” on page 17. • Section 3.3 “Connecting to the Data Network” on page 18. •... -
Page 22: Connecting To The Tsbc-Hw-Srv Management Interface
TSBC Series System Installation Guide Connecting to the TSBC-HW-SRV Management Interface The TSBC-HW-SRV management interface enables administrators to perform management tasks on a TSBC-HW-SRV. To learn about the network capabilities of the TSBC-HW-SRV, refer to https://docs.telcobridges.com/tbwiki/TSBC-SW:Networking. Prerequisites To communicate with the management interface, the following is needed: •... -
Page 23: Connecting To The Control Network
Installing the TSBC-HW-SRV Connecting to the Control Network Connection to the TSBC-HW-SRV control network is required only if your system includes a second TSBC-HW-SRV for high availability, or because of required transcoding sessions provided by TBSC- HW-TRANS unit(s). Note If you do not have any transcoding units, connect the TSBC-HW-SRV units back to back. Prerequisites To connect the TSBC-HW-SRV to the control network, you will need: •... -
Page 24: Connecting To The Data Network
TSBC Series System Installation Guide Connecting to the Data Network The TSBC-HW-SRV-HIGH and TSBC-HW-SRV-MID feature dual GigE ports for connection to multiple VoIP networks. Both server models feature dual 1Gb and 10 Gb ports. The data Ethernet ports can be used for either WAN or LAN networks or for the transcoding network. -
Page 25: Tsbc-Hw-Srv-High: 10G
Installing the TSBC-HW-SRV Data Ports TSBC-HW-SRV-HIGH Data Ports Figure 3.3 TSBC-HW-SRV-HIGH: Connecting to the Data Network 3.3.2 TSBC-HW-SRV-HIGH: 10G Prerequisites To connect the TSBC-HW-SRV-HIGH to the data network using a 10Gb connection, you will need: • Gigabit layer 2 Ethernet switch. A second one is required to support redundancy of the VoIP interface. -
Page 26: Tsbc-Hw-Srv-Mid: 1G
TSBC Series System Installation Guide 3.3.3 TSBC-HW-SRV-MID: 1G Prerequisites To connect the TSBC-HW-SRV-MID to the data network using a 1Gb connection, you will need: • Gigabit layer 2 Ethernet switch. A second one is required to support redundancy of the VoIP interface. - Page 27 Installing the TSBC-HW-SRV Data Ports TSBC-HW-SRV-MID Figure 3.6 TSBC-HW-SRV-MID: Connecting to the Data Network...
-
Page 28: Powering Up
TSBC Series System Installation Guide Powering Up The TSBC-HW-SRV is furnished with two AC or two DC power connections. Only once all other equipment installation work has been completed should the equipment be powered up. Prerequisites To power the TSBC-HW-SRV, you will need: •... - Page 29 Installing the TSBC-HW-SRV Power Power Source 1 Source 2 Figure 3.8 TSBC-HW-SRV DC Power Connections...
- Page 30 TSBC Series System Installation Guide...
-
Page 31: Installing The Tsbc-Hw-Trans
Installing the TSBC-HW-TRANS Section 4 Installing the TSBC-HW-TRANS This section covers the following procedures: • Section 4.1 “Connecting to the Control Network” on page 26. • Section 4.2 “Connecting to the Transcoding Network” on page 27. • Section 4.3 “Grounding the Equipment Chassis” on page 28. •... -
Page 32: Connecting To The Control Network
TSBC Series System Installation Guide Connecting to the Control Network The TSBC-HW-TRANS Control network enables communication between the TSBC-HW-SRV and the TSBC-HW-TRANS. Prerequisites To connect the TSBC-HW-TRANS, you will need: • Two CAT5 Ethernet cables with RJ45 male-male terminations. Connections The TSBC-HW-TRANS is connected to the control network using two CAT5 Ethernet cables, as shown Figure 4.1 on page 26. -
Page 33: Connecting To The Transcoding Network
Installing the TSBC-HW-TRANS Connecting to the Transcoding Network The TSBC-HW-TRANS features dual GigE ports for connection to the transcoding networks. Should one of the IP networks fail, the TSBC-HW-TRANS will continue to manage VoIP traffic using the alternate network. The IP address of the VoIP ports can be modified using the web portal. Note: The TSBC-HW-TRANS requires two (2) gigabit layer 2 Ethernet switches. -
Page 34: Grounding The Equipment Chassis
TSBC Series System Installation Guide Grounding the Equipment Chassis As a standard safety practice, the chassis of the TSBC-HW-TRANS must be properly grounded to protect against any contact with an electrical fault condition. It is recommended that the chassis be connected to earth ground. -
Page 35: Powering Up
Installing the TSBC-HW-TRANS Powering Up The TSBC-HW-TRANS is furnished with two AC or DC power connections. Only once all other equipment installation work has been completed should the TSBC-HW-TRANS be powered up. 4.4.1 Connecting to AC Power Prerequisites To power the TSBC-HW-TRANS, you will need: •... -
Page 36: Connecting To Dc Power
TSBC Series System Installation Guide 4.4.2 Connecting to DC Power The TSBC-HW-TRANS DC model is furnished with two DC power connection ports. In addition, each DC powered unit is supplied with two DC power cables. Fuse and Cabling Requirements 16 AWG wiring must be used and the 48V supply must be protected with a customer provided 5A 48V fuse. -
Page 37: Start Up And Verification
Start Up and Verification Section 5 Start Up and Verification This section provides information about the following topics: • Section 5.1 “Start Up” • Section 5.2 “Verifying the LED Status Indications” Note To learn about the IP address for your system or how to change it, refer to Section 7.3 “Changing the TSBC-HW-SRV Management Port IP Address”... -
Page 38: Verifying The Led Status Indications
TSBC Series System Installation Guide Verifying the LED Status Indications When the TSBC-HW has been powered up, verify the LEDs of each unit to determine that all indications are normal. 5.2.1 TSBC-HW-SRV To determine the operating health of the TSBC_HW_SRV, verify the LED statuses at the front and the... -
Page 39: Tsbc-Hw-Trans
Start Up and Verification 5.2.2 TSBC-HW-TRANS Front of unit When the equipment is powered, verify the front panel to determine that the LED indication is normal. Table 5.1 on page 33. Table 5.1 Front Panel Displays Description Green - Steady •... - Page 40 TSBC Series System Installation Guide...
-
Page 41: Powering Down The Equipment
Powering Down the Equipment Section 6 Powering Down the Equipment This section provides the following power-down topics: • Section 6.1 “TSBC-HW-SRV” • Section 6.2 “TSBC-HW-TRANS” TSBC-HW-SRV Attention DO NOT TURN OFF the power to the TSBC-HW-SRV unless the Linux host has been properly shut down beforehand. - Page 42 TSBC Series System Installation Guide...
-
Page 43: Initial System Configuration
Section 7 Initial System Configuration This section provides information about the following topics: • Section 7.1 “TSBC-HW-SRV SSH Connection” • Section 7.2 “TSBC-HW-SRV Serial Connection” • Section 7.3 “Changing the TSBC-HW-SRV Management Port IP Address” • Section 7.4 “Retrieving TSBC-HW-SRV Information” •... -
Page 44: Tsbc-Hw-Srv Ssh Connection
TSBC Series System Installation Guide TSBC-HW-SRV SSH Connection The TSBC-HW-SRV is shipped with the TSBC-SW software preinstalled. In order to make changes to the system configuration, you must connect the port labelled MGMT0 at the front of the TSBC-HW-SRV to a terminal. - Page 45 Initial System Configuration Method 1: Null modem DB9 female-female cable Connect a null modem DB9 female-female cable between the DB9 serial port of your computer and the DB9 serial port of the TSBC-HW-SRV. See Figure 7.2 on page 39. To computer Serial Port TSBC-HW-SRV-HIGH To computer...
- Page 46 TSBC Series System Installation Guide To computer Serial Port TSBC-HW-SRV-HIGH To computer Serial Port TSBC-HW-SRV-MID Figure 7.3 USB to DB9 Adapter...
-
Page 47: Configuring The Terminal Emulator Application
Initial System Configuration Method 3: VGA Monitor, USB Keyboard, and USB Mouse Connect a VGA monitor to the VGA port of the TSBC-HW-SRV. Connect a USB keyboard to an available USB port on the TSBC-HW-SRV. Do the same for a USB mouse See Figure 7.4 on page 41. - Page 48 TSBC Series System Installation Guide Set the flow control to None Note Section 7.3 on page 43 to learn how to change the IP address of the MGMT0 port.
-
Page 49: Changing The Tsbc-Hw-Srv Management Port Ip Address
Retrieving TSBC-HW-SRV Information The TSBC-HW-SRV enables you to retrieve system information with the following shell commands: • tbproduct (retrieve the TSBC-HW-SRV product type). See http://docs.telcobridges.com/tbwiki/Get_Product_Type, for further information. • tbserial (retrieve the TSBC-HW-SRV serial number). See http://docs.telcobridges.com/tbwiki/Get_Serial_Number, for further information. - Page 50 TSBC Series System Installation Guide Use the Web Portal to configure the TSBC-HW-SRV. Follow the steps described in the Web Portal System Configuration Tutorial Guide, found on the TBWiki: http://docs.telcobridges.com The Web Portal can be accessed with a Web browser.
-
Page 51: System Backups
Section 8 System Backups This section provides information about the following topics: • Section 8.1 “Creating a Database Backup” • Section 8.2 “Downloading a Database Backup” • Section 8.3 “Uploading a Database Backup” • Section 8.4 “Restoring a Database Backup”... -
Page 52: Creating A Database Backup
TSBC Series System Installation Guide For more detailed information with regard to any of the points described in this section, please refer to the TBWiki: http://docs.telcobridges.com Creating a Database Backup It is important that backups be made of system configuration settings in the event of a system failure. It is recommended that a backup be made once the system has been configured.
Need help?
Do you have a question about the TSBC Series and is the answer not in the manual?
Questions and answers