Table of Contents
Advertisement
4-24
Chapter 4
To disable a password, just press <Enter> when you are prompted to enter the password. A
message will confirm the password will be disabled. Once the password is disabled, the
system will boot and you can enter Setup freely.
Changing a Password:
Select the appropriate password option (Supervisor or User) from the main menu and press
<Enter>. Enter the current password and press <Enter>. The screen does not display the
characters entered. Enter in the new password, then the confirmation. You cannot change the
current password unless you know it.
Erasing a Password:
If you know the current password, but want to disable password checking, follow the
procedure for changing the password. When Setup prompts for the new password, simply
press <Enter>. You will see a message indicating that the password is disabled.
If you do not know the current password, the CMOS must be cleared by the CMOS clearing
jumper.
* This will clear all user-defined BIOS Setup options.
4-12. Save & Exit Setup / Exit Without Saving
Selecting Save & Exit Setup to save into the CMOS memory all modifications specified
during the current session. To save the configuration changes, highlight this option in the
main menu and press <Enter>. The system displays a confirmation message on the screen.
Press "Y" and then <Enter>. Press the "N" and then <Enter> to abort. The Exit Without
Saving options allows the user to exit the BIOS Setup without updating any changes made
during the current session.
BG-71
Advertisement
Table of Contents
