Button Operation - ActiGraph CPW01 Technical Manual

Document No:
E.200.4038
Revision: 0
3. Miscellaneous Device Information
3.1 Device Irritation
If irritation of the skin occurs due to wearing the device, discontinue wearing the device and consult a
doctor for treatment. Although the copolymer materials are not known to be irritating to the skin, some
irritation to individuals with sensitive skin may occur. If this happens, consult your doctor for treatment
and stop wearing the device.
3.2 Degradable Components
ActiGraph's devices are made with high quality components that are not subject to deterioration over
time. However, if a device seems to be underperforming, call ActiGraph's Customer Service immediately
at (877) 497-6996 so they problem may be resolved.
3.3 Other Possible Negative Effects
Pets have the potential to destroy a device. Keep devices away from pets and other animals that may
chew, bite, urinate on, swallow, and/or destroy a device in any other method imaginable.
3.3.1 Household Interference
Within a household environment many different factors can negatively affect the device. Putting a
device close to hot sources such as a fireplace or baseboard heater will melt the housing of a device and
destroy it. Putting a device in the freezer for extended periods of time will reduce the capacity of the
battery's lifespan and negatively affect its performance. Putting a device in a microwave will destroy
various parts of the device and potentially destroy it. Wireless internet connections, wireless television
service, and other wireless services will not negatively affect the performance of the device. As a rule of
thumb, do not put the device in extreme cold or hot temperatures and do not apply any electrical
sources to the device unless explicitly approved by ActiGraph.
3.4 Wear Locations
The ActiGraph CPW01 is designed to be worn on the wrist. Other wear locations would have to be
selected in the CentrePoint system and ActiGraph should be contacted if other wear locations are
desired.

3.5 Button Operation

The button can be used to enable a backlight on the display for viewing in low light areas. Simply press
the button to activate the light.
3.6 Device Serial Number Label
Each device is equipped with a label stuck to it with pertinent device information inside the serial
number. For example the serial number (01)00853048008039 (21)CPW1E24180001 means:
● (01) = GS1 Application Identifier for GTIN
CentrePoint Insight Watch Technical Manual
Page 5 of 10