Download Print this page

ThermoPro TP-50 Instruction Manual page 8

Indoor humidity and temperature monitor
Hide thumbs Also See for TP-50:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 7
DANGER!
Do not expose the device to high temperatures.
EN
Use only the recommended batteries. Do not
short-circuit the device or batteries, or throw
them into a fi re. Excessive heat or improper
handling could trigger a short-circuit, a fi re or
an explosion!
NOTE!
Do not disassemble the device. In the event
of a defect, please contact your dealer. The
dealer will contact the Service Centre and can
send the device in to be repaired, if necessary.
Use only the recommended batteries. Always
replace weak or empty batteries with a new,
complete set of batteries at full capacity. Do
not use batteries from different brands or with
different capacities.The batteries should be
-14-
removed from the unit if it has not been used
for a long time.
Notes on cleaning
Separate the device from the power supply or
remove the batteries before cleaning.
Only use a dry cloth to clean the exterior of the
device. Do not use any cleaning fluid to avoid
damaging the electronics.
large LCD display
SIDE
1. Display: Displays the current humidity and
°F ° / C/Clear
Magnet
Stand
Battery Compartment
-15-
EN

Advertisement

loading