Honda 08F53-T0A-100 Installation Instructions

INSTALLATION
INSTRUCTIONS
Put this information in the glove box with the vehicle owner's manual.
PARTS LIST
Exhaust pipe finisher
Washer-bolt
TOOLS AND SUPPLIES REQUIRED
Ratchet
10 mm Socket
Torque wrench
Illustration of the Exhaust Pipe Finisher Installed on
the Vehicle
EXHAUST PIPE FINISHER
© 2011 American Honda Motor Co., Inc. – All Rights Reserved.
Accessory
EXHAUST PIPE FINISHER
P/N 08F53-T0A-100
INSTALLATION
NOTE:
• Install the accessory with care not to damage the
• The exhaust pipe finisher is designed exclusively for
• Allow the exhaust pipe to cool down before installing
1.
QA11101AD
AII 46215 (1112)
Application
CR-V
vehicle body and the parts of the vehicle.
the CR-V, it is not applicable to the other models.
the exhaust pipe finisher.
Partially thread the washer-bolt into the exhaust pipe
finisher. Slide the exhaust pipe finisher onto the
exhaust pipe.
REAR VIEW
EXHAUST PIPE
FINISHER
Publications No.
AII 12074
Issue Date
DEC 2011
CROSS SECTION
EXHAUST
WASHER-
BOLT PIPE
FINISHER
EXHAUST PIPE
FINISHER
WASHER-BOLT
Loosely install.
EXHAUST PIPE
QA11102BD
1 of 2
08F53-T0A-1000-90