Connecting And Setting Up Loupedeck; How Do I Power Loupedeck; Disconnecting From Your Computer - Loupedeck + User Manual

CONNECTING AND SETTING UP LOUPEDECK+

Setting up Loupedeck+ is as easy as 1-2-3.
1. Download the Loupedeck software from
software.
2. Connect the USB cable to the USB port of your computer.
3. Start editing!

How do I power Loupedeck+?

At this point you might think, hold on, where's the power cable? Well, the simple answer is that
there is no need for one, as Loupedeck+ is powered from its USB cable.

Disconnecting from your computer

When you want to disconnect the console from your computer, there's no need to go through
the "safely remove your hardware" operation. Just disconnect the USB cable, and you're done.
Copyright (c) 2017 Loupedeck Ltd. All rights reserved.
www.loupedeck.com/setup and install the
4