Seagate MEDALIST 1080SL Installation Manual page 9

Medalist 1080sl SCSI Installation Guide, August 1995
J8. Options jumper block
33 31 29 27 25 23 21 19 17
34 32 30 28 26 24 22 20 18
Note.
1. All other pins
are reserved. Do
not use them.
2. Jumpers on
pins 28 and 30
and 32 and 34
are spares; these
pins do not
require jumpers.
Figure 2. Options jumper settings
Circuit board
side up.
15 13 11 9 7 5 3 1
16 14 12 10 8 6 4 2
Spares
SCSI ID 0
SCSI ID 1
SCSI ID 2
SCSI ID 3 (default)
SCSI ID 4
SCSI ID 5
SCSI ID 6
SCSI ID 7
Reserved
Do not use
Remote LED
connection
Remote start
Enable parity (default)
Disable terminator
(default is enable)
Power to drive
terminator only
Power from bus, drive
terminator disabled
Power to drive
terminator and to
SCSI bus (default)
Power to SCSI
bus only
7