EnOcean LEDRU Installation Manual

LEDRU LED 0-10V Zone Controller Installation Guide
Package Contents
LED Relay Zone

Controller
Product Description
The LED relay zone controller uses wireless technology to
communicate with other self-powered EnOcean based
products and provides an amazingly simple solution for
dimming control of LED lighting.
The compact size enables flexible installation inside of or
next to electrical boxes and fixtures so it can be easily wired
out of sight using standard wiring practices.
Simply link the module to an EnOcean-based motion sensor,
light level sensor or rocker switch and experience levels of
efficiency and convenience that can only be achieved
through wireless controls.
It is also possible to connect a 12V DC powered, wired
occupancy sensor.
Product Features Include:
Enables wireless dimming of a single fixture or a zone of

multiple daisy chained LED fixtures (e.g. 20 each 30W or
10 each 60W).
Supports California Title 24 daylight harvesting scenarios,

occupancy control and manual dimming with input from
self-powered wireless switches and sensors. Implements
load shedding initiated by separate Demand Response
controllers
Installs inside or mounts to electrical box using threaded

connector
Supports wireless remote commissioning to link devices

and set parameters
© 2018 EnOcean GmbH V3.0
Tools Required
Screwdriver

Wire nuts

LEDRU-W-EO / LEDRU-W-AU DD08 and up
Specifications (typ. values)
Power Supply 120V - 277V VAC, 60 Hz
Maximum Load General Purpose: 16A @ 120/277VAC
Resistive: 16A @ 120/277VAC
Tungsten: 960W @ 120VAC
Ballast / LED Driver: 600W @ 120VAC
0-10V output Tolerances +3%/-4% (1-10V range)
Current sinking 35mA*, sourcing 20mA
Power Consumption 1W full load
0.35W quiescent
Surge Protection 3kV line to line, exceeding
IEC61000-4-5 installation class 4
Inputs/Outputs Flying-lead style wires:




Local User Interface 2 Buttons, 1 bi color LED for device
configuration & manual control
RF Standard EnOcean 902 MHz (LEDRU)
Transmission Range 100 ft. (30 m)
Status reporting EEP D2-40-00 (default)
(Outbound EnOcean A5-11-01 (alternate)
Equipment Profile) A5-38-08 (Master / Gateway)
RECOM V1.1 - Compatible with Navigan™
Interoperable Rocker Pad Switch (F6-02-02)
Products / EEPs Occupancy Sensor
(Inbound EnOcean (A5-07-01, A5-07-02, A5-07-03)
Equipment Profiles) Light Level Sensor
(A5-06-02, A6-06-03)
Central Controller (A5-38-08)
Demand Response (A5-37-01)
Dimensions 2.78" H x 1.65" W x 1.1" D
(73mm x 42mm x 28mm)
Weight 3.2oz. (90g)
Mounting


Environment



Agency Compliance UL244A, UL 1472, CSA/CAN
C22.2 No. 184.1, FCC, IC
UL2043 Plenum Rated
2 power input wires
1 switched output wire
0-10V control output
12V DC external occupancy sensor
Interface (25mA load max)
only for
LEDRU-W-AU
Connect to electrical boxes and
fixtures using threaded nipple
Install inside standard electrical box
Indoor use only
32° to 140° F (0° to 60° C)
20% to 85% relative
humidity (non-condensing)
Page 1