Advertisement
Assembly
1 . Place the protective cover onto the stainless steel shaft . Screw the
handle clockwise onto the stainless steel shaft to tighten .
2 . Insert the shaft into the hole of the protective cover .
3 . Screw the food holder to the bottom of the stainless steel shaft so that the
teeth are pointed downward .
4 . Set the cutting surface on the collection bowl (as shown in diagram) and
turn clockwise to lock into collection bowl .
Protective cover
Food holder
Cutting surface
Julienne blade dial
Handle
3
Handle knob
Stainless steel shaft
Ribbon blade dial
Center pin
Collection bowl
Advertisement
