Assembly & Use Instructions 1 . Place the milling disc of your choice Figure 1 into the center of the food mill with the dome-shaped surface facing up . 2 . Insert the handle pin into the center Handle Locking hole of the milling disc .
10 . It is best to clean the food mill immediately after use to prevent food from drying in the holes of the milling disc . PRIOR TO USING It is best to pre-soften some foods prior to use . If the food is firm, like potatoes, apples and pears, remember to soften them by steaming or baking until tender before using them in the food mill .
the unit is in operation . Severe injury may result . 4 . Do not attempt to grind bones, nuts or other hard items . Grinding food other than what the food mill was intended for will void the warranty . 5 .
. HASSLE-FREE REPLACEMENT WARRANTY Your ultimate satisfaction in Cuisinart products is our goal, so if your Cuisinart Tool or Gadget should fail within the generous warranty ®...
Page 7
. Cuisinart, and not the consumer, will be responsible for the reasonable cost of such service, repair, replacement or refund for nonconforming products under warranty .