Silvercrest SGM 110 A1 Operating Instructions Manual page 13

13) Assume a reclined position and put your head back. Place the mask on your
face. Start with the cut-outs for your eyes. Make sure that your eyes are aligned
with the corresponding cut-outs in the mask. Do the same with the cut-outs for
nose and mouth. Make sure that you can breathe easily (see Fig. 3)
14) Leave the mask to take effect for approx. 10-15 minutes, depending on
personal preference. Afterwards just remove it.
NOTE
► If you experience any unpleasant feeling during the application or if your
skin begins to itch or burn, remove the mask from your face immediately.
Rinse your face with plenty of fresh water!
► Used masks can be disposed of in normal domestic waste.
■ 10 │ GB│IE│NI
Fig. 3
SGM 110 A1