Reference Diagrams - U-Line UHNB315 User Manual & Service Manual

USER GUIDE

Reference Diagrams

DISASSEMBLE EVAPORATOR MODULE
Remove Gear Motor and Auger
1. Unplug the gear motor (three connectors)
2. Remove ground screw connection.
3. Remove gear motor
a. Remove M6 allen screw, retainer, spacer and key
b. Remove two M6x90 allen screws
c. Pull gear motor from auger
d. Remove main housing insulation
4. Remove all traces of Petrol-gel from auger shaft
3b
3c
3a
3b
5. Remove compression nozzle
a. Loosen hose clamp
b. Remove transport tube
5a
5b
Reference Diagrams
3d
6. Remove M6 socket head allen screw
7. Remove compression nozzle retainer
8. Remove compression nozzle
6
7
9. Remove main housing
• Disconnect vent line from T fitting
10. Remove three M6x25 socket head allen screws
11. Remove main housing
11
10
12. Remove and discard mating ring and seal
13. Carefully remove augerRemove
WARNING
!
The auger is very sharp; handle with care to avoid
personal injury.
12
30
u-line.com
8
9
13