Maintenance - Workzone 50501 User Manual

High Pressure Washer
WARNING: To reduce the risk of electrocution, keep all connections
dry and off the ground. Do not touch plug with wet hands.

6. Maintenance

6.1 Monthly or as required, maintenance the
6.1.1 Clean the nozzle. Remove dirt from the nozzle hole with a needle and
rinse it with water from the front.
6.1.2 Clean the strainer in the water connection. It can e easily removed
with at-nosed pliers.
6.2 Winter protection
Frost will destroy an appliance that has not been completely emptied of
water. The correct method is to separate the inlet hose from the water
supply system. Turn on the cleaner to run for about 30 seconds for water
extraction. Remove the high-pressure plastic hose to exhaust the remain-
ing water in it. The appliance had better be stored in a warm room.
11
acs@americancustomerservice.com
Maintenance
appliance.
AFTER SALES SUPPORT
1800 505 8311
USA
USA