Table of Contents
Advertisement
Evolution Digital
Figure 17 Code Objects Diagnostic Screen
Two banks are shown, Bank A and Bank B. The Bank with the asterisk (*) is the active image being used. Please
note that the object names shown in Figure 17 may not match the names for the DTAs you are using. The figure is
for illustration purposes only.
The DTA supports three types of file locations; these location values are discussed in more detail in the following
sections.
2.6.2.1 Location Value 0
The DTA supports a Location Value in the CVT of 0 (zero). The DTA will attempt to associate the Source ID
received in the CVT with a Source ID in the channel map. If it fails to make an association because there is no
channel map or there is no entry in the channel map matching the Source ID, the DTA will not attempt to download
the code.
2.6.2.2 Location Value 1
The DTA supports Location Value in the CVT of 1 (one). The DTA will attempt to tune to the Frequency indicated
in the Frequency Vector field of the CVT with the Modulation Type provided and download the PID listed. The
DTA will only accept modulation types of 1 or 2; it will ignore the CVT if the modulation type of not 1 or 2.
Failure to lock to the frequency after three attempts will result in the DTA reverting back to the previous operating
mode.
EVO-SUP-DMS2002HD-U-001-v1r0
Page 33
Hide quick links:
Advertisement
Table of Contents
