Evolution Digital HD uDTA Quick Start Manual

Toggle TV Input
View the channel name
and number, date and time
For future use
Display the Main Menu
Select a highlighted item
within Menus. Display channel name
and number, date and time
Audio up & down
For future use
Toggle to secondary language
*TV must be programed with the remote
To force remote control to send volume
control commands to the TV
1. Press and hold Setup
LED Indicator turns green.
2. Press the volume up
Note: Refer to the Remote Control Programming and Operating instructions, provided with your remote control, to program your remote to work on your TV and
for more detailed information regarding pairing your remote.
HD uDTA Remote Control
TV Input
*
Info
Page Up
Menu
OK
Volume
Guide
Yellow A
(if available)
NOTE
• When inserting batteries, make sure that the polarity (+/-) is correct.
• The LED on the top of the remote is a visual indicator that confirms the remote has power
when a button is pressed.
• Your remote may vary slightly from the one pictured here. However, basic functions
should remain the same.
button until the
button
LED Indicator
Button press and special
command indication
TV Power
Turn your TV on or off
Last
Return to the previous channel or menu
Exit
Return to watching TV
Page Down
For future use
Channel
Channel up & down
Mute
Sound on & off
Red C
Toggles through available
closed captioning
Setup
Program your remote control to your
STB and TV
To force remote control to send volume
control commands to the HD STB
1. Press and hold Setup button until the
LED Indicator turns green.
2. Press the volume down
*
button