Advertisement
4
Using the induction cooker
Preset time for delayed cooking
There are five cooking modes: Stir Frying (
), Hot
You can use the Preset/Timer button (
Pot (
), Steam/Stew (
), Soup/Congee(
), and
the time at which you want the appliance to start
Water Boiling (
).
cooking. The preset timer is available up to 24 hours.
1
Follow the steps in "Preparing for use".
1
Follow the steps in "Preparing to use".
2
Press the On/Off button (
), the On/Off indicator
2
Press the On/Off button (
lights up.
lights up.
Press the desired cooking button. The
3
3
Choose the desired cooking mode.
corresponding indicator lights up and the
4
Press the Preset/Timer button (
induction cooker starts working in the selected
times until the preset indicator lights up.
mode.
Press the Increase (
5
When the cooking is finished, press the On/Off
4
to choose the desired preset time.
button (
) to switch off the appliance.
6
When the preset time has elapsed, you will hear a
5
Unplug the induction cooker after the fan stops
few beeps and the induction cooker starts working
working.
automatically.
Note
Note
•
•
During cooking, you can change the power level by
The preset timer is available in the following cooking
) or Decrease (
) button.
pressing the Increase (
modes:
•
In Water Boiling (
), Soup/Congee (
), and Steam/
Water Boiling (
Stew (
) modes, the cooking power automatically
•
After you have selected the preset time, wait for a few
changes for better cooking result.
seconds before the induction cooker automatically
confirms it.
•
When the induction cooker is at preset mode, you can
press the Preset/Timer button (
Using the timer
preset time.
You can use the Preset/Timer button to decide
how much time you want the appliance to work at
5
Cleaning
different cooking modes (not applicable in Water/
Boiling (
) mode).
1
Unplug the appliance after the fan stops working
Follow the steps in "Preparing for use".
1
and let it cool down.
2
Press the On/Off (
) button, the On/Off (
)
2
Clean the appliance with a damp cloth and, if
indicator lights up.
necessary, with some mild cleaning agent.
3
Choose the desired cooking mode.
Press the Preset/Timer button (
) once or more
4
6
Recycling
times until the timer indicator lights up.
5
Press the Increase (
) or Decrease (
) button to
Do not throw away the product with the normal
adjust the time.
ousehold waste at the end of its life, but hand it in at
6
When the time has elapsed, the induction cooker
an official collection point for recycling. By doing this,
turns off automatically.
you help to preserve the environment.
Note
7
Guarantee and service
•
After you have selected the cooking time, wait for a
If you need service or information or if you have
few seconds before the induction cooker automatically
confirms it.
a problem, please visit the Philips website at
•
After the timer is set, you can press the Preset/Timer
www. philips.com or contact the Philips Consumer
button (
) again to cancel the timer.
Care Centre in your country (you will find its phone
number in the worldwide guarantee leaflet). If there
is no Consumer Care Centre in your country, go to
your local Philips dealer.
8
Troubleshooting
If your induction cooker does not function properly
or if the cooking quality is insufficient, consult the
table below. If you are unable to solve the problem,
contact a Philips service centre or the Consumer
Care Centre in your country.
Problem
Solution
The On/Off
There is a connection problem.
) to set
button (
) does
Check if the induction cooker is
not respond.
connected to the mains and if
the plug is inserted firmly into the
wall socket
), the On/Off indicator
The appliance
You may have put unsuitable
beeps
cookware on the cooking plate
continuously
or you may have removed the
) once or more
and then stops
cookware from the cooking plate
working.
during cooking. Make sure the
) or the Decrease (
) button
cookware is made of steel, iron
or aluminum with stainless steel
cladding base and has a base
diameter larger than 12cm.
You may have placed the
cookware outside of the cooking
zone.
The cookware
The bottom of the cookware may
Steam/Stew (
), Soup/Congee (
) and
does not heat up
not be flat. Use cookware with a
).
to the required
flat bottom. If the problem still
temperature.
exists, take the appliance to your
Philips dealer or a service center
authorised by Philips.
) again to cancel the
The appliance
The temperature of the cookware
stops working
might be too high. Let the
suddenly.
cookware cool down for a while.
The cooking
During cooking, you can change
temperature
the power level by pressing the
of the preset
Increase (
modes are too
button.
high or too low.
When I press
The light is defective. Take the
one of the
appliance to your Philips dealer
cooking mode
or a service centre authorised by
buttons, the light
Philips.
of the selected
mode does not
go on.
The cooking
In Water/Boiling (
temperature
Congee (
automatically
(
changes in some
temperature automatically
preset modes.
changes for better cooking result.
Error code E1,
The induction cooker has
E2, E3, E4, or E7
malfunction. Take the appliance
is displayed on
to your Philips dealer or a service
the screen.
center authorised by Philips.
Error code E5 or
The voltage is either too high
E6 is displayed
or too low. Check if the voltage
on the screen.
in your home is suitable for the
induction cooker.
简体中文
1
您的电磁炉
恭喜您购买了您的产品，欢迎您来到 Philips 大家庭！为
了您能充分享受飞利浦提供的支持，请在
www.philips.com/welcome 上注册您的产品。
2
包装盒内物品
电磁炉主装置
保修卡
重要信息单页
用户手册
总体说明
a
炉面
d
控制面板
b
烹饪区
e
出风口
c
进风口
f
电源线
控件概述
炒菜按钮
煲汤/粥按钮
g
n
h
火锅按钮
o
儿童锁按钮
i
蒸/焖按钮
p
烧水按钮
j
预设指示灯
q
减小按钮
k
显示屏幕
r
烹饪功率和温度
l
定时器指示灯
s
增大按钮
) or Decrease (
)
m
预设/计时器按钮
t
开/关按钮
3
首次使用之前
拆掉电磁炉上的所有包装材料。
使用准备
1
将产品放在一个干燥、平稳的表面上。
), Soup/
2
应确保电磁炉周围至少有 10 厘米的空间以防过热。
), and Steam/Stew
3
在烹饪过程中炊具始终放置在烹饪区上面。
) modes, the cooking
4
确保使用的炊具类型和尺寸正确（请参见下表）。
建议的炊具类型和尺寸
材料
底部是由铁或磁性不锈钢制成的炊具
外形
平底炊具
4
5
使用电磁炉
清洁
有五种烹饪模式可供选择：炒菜 (
)、火锅 (
)、
1
风扇停止工作后，拔掉产品的电源插头，待其冷却。
蒸/焖 (
)、煲汤/粥 (
) 以及烧水 (
)。
2
用湿布清洁电磁炉，必要时使用一些中性清洁剂。
1
按照"准备使用"中的步骤操作。
2
按开/关按钮 (
)，开/关指示灯亮起。
6
回收
3
按所需的烹饪按钮。对应的指示灯亮起，电磁炉按照
所选模式开始工作。
弃置产品时，请不要将它与一般生活垃圾一同丢弃，应
4
烹饪完成后，按开/关按钮 (
) 关闭产品。
将其交给官方指定的回收中心。这样做有利于环保。
风扇停止工作后，拔掉电磁炉的电源线 。
5
7
保修与服务
注意
如果您需要服务或信息或有任何问题，请浏览飞利浦网
•
烹饪期间，您可以通过按增大 (
) 或减小 (
) 按钮来更改
站，地址为 www.philips.com。您也可以与您所在国家/
功率大小。
地区的飞利浦客户服务中心联系（您可以从全球保修卡
•
在烧水 (
)、煲汤/粥 (
) 和蒸/焖 (
) 模式下，烹饪功
中找到电话号码）。如果您所在的国家/地区没有飞利浦
率将自动更改以获得更好的烹饪效果。
客户服务中心，请向当地的飞利浦经销商求助。
8
故障排除
使用计时器
如果电磁炉工作不正常，或烹饪质量有缺陷，请查询下
您可以使用预设/计时器按钮确定产品在不同烹饪模式下
表。如果无法解决问题，则请联系您所在国家/地区的飞
工作的时间（在烧水 (
) 模式下不适用）。
利浦服务中心或客户服务中心。
1
按照"准备使用"中的步骤操作。
2
按开/关 (
) 按钮，开/关 (
) 指示灯亮起。
问题
3
选择所需的烹饪模式。
开/关按钮 (
4
按预设/计时器按钮 (
) 一次或多次，直到计时器指
不响应。
示灯亮起。
产品持续发出蜂
5
按增大 (
) 或减小 (
) 按钮调整时间。
鸣音，然后停止
6
到达时间时，电磁炉将自动关闭。
工作。
注意
•
选择烹饪时间之后，请等待几秒钟，然后电磁炉将自动确
炊具没有加热到
认时间。
•
计时器设定好后，再次按预设/计时器按钮 (
) 可以取消
所需温度。
计时器。
产品突然停止
工作。
延长烹饪的预设时间
预设模式的
您可以使用预设/计时器按钮 (
) 设置想要产品开始烹
烹饪温度过高或
饪的时间。预设计时器最长可达 24 小时。
过低。
1
按照"准备使用"中的步骤操作。
按下某个烹饪模
2
按开/关按钮 (
)，开/关指示灯亮起。
式按钮时，所选
3
选择所需的烹饪模式。
模式的指示灯
按预设/计时器按钮 (
) 一次或多次，直到预设指示
4
不亮。
灯亮起。
在某些预设模式
5
按增大 (
) 或减小 (
) 按钮选择所需的预设时间。
下，烹饪温度会
6
到达预设时间时，您将听到几声蜂鸣音，电磁炉将自
自动更改。
动开始工作。
屏幕上显示错误
代码 E1、E2、
注意
E3、E4 或 E7。
•
屏幕上显示错误
以下烹饪模式下可以使用预设计时器：蒸/焖 (
)、煲
代码 E5 或 E6。
汤/粥 (
) 和烧水 (
)。
•
选择预设时间之后，请等待几秒钟，然后电磁炉将自动确
认时间。
•
当电磁炉处于预设模式时，再次按预设/计时器按钮
(
) 可以取消预设时间。
解决方法
接触不良。检查电磁炉是否与电源
)
连接，插头是否插牢。
烹饪期间炉面上放置了不合适的炊
具，或者您从炉面上取下了炊具。
确保炊具为钢、铁制品或不锈钢底
的铝制品，并且底面直径大于
12 厘米。
炊具可能放置在烹饪区外。
炊具底部不平。请使用平底炊具。
如果问题仍然存在，请将本产品送
往当地的飞利浦经销商，或经飞利
浦授权的客户服务中心。
炊具温度过高。让炊具冷却
一会儿。
烹饪期间，您可以通过按增大 (
)
或减小 (
) 按钮来更改功率大小。
指示灯有故障。请将本产品送往当
地的飞利浦经销商，或经飞利浦授
权的客户服务中心。
在烧水 (
)、煲汤/粥 (
) 和
蒸/焖 (
) 模式下，烹饪温度会自
动更改，以获得更好的烹饪效果。
电磁炉发生故障。请将本产品送往
当地的飞利浦经销商，或经飞利浦
授权的客户服务中心。
电压过高或过低。检查家中的电压
是否适合电磁炉。
Advertisement
