Handsfree Calling - Ericsson CF888 User Manual

Some features/menus are operator dependent

Handsfree Calling

Using the Ericsson portable or vehicle handsfree solutions,
you can be engaged in a call without having to use your hands
to hold your phone.
Selecting Answering Mode
The submenu Answering mode includes two func-
tions: Any key and Auto, which are useful when the
phone is used with handsfree equipment.
The Any key function:
If the phone is used with handsfree equipment and this
function is turned on, you can answer an incoming call by
pressing any key except the
The Auto function:
If you choose automatic answering mode, an incoming
call will be answered automatically after one ring signal if
the phone is used with handsfree equipment.
To select Answering Mode:
Select Answering mode from the Settings
menu.
Choose Any key or Auto using the navigation key.
Press to change the setting of the function you have
YES
chosen.
Press again to confirm your setting.
YES
52
Other Handsfree Related Settings
key.
NO
Apart from the above mentioned settings, you can change
the following settings related to handsfree calling:
Ring level
Ear volume
Ring type
Key lock
Light
Each of these settings can be specified separately for the
situations when you have your CF888 connected to hands-
free equipment and when you use the phone as a handheld
unit. This means that if you make one of these settings when
the phone is connected to handsfree equipment, the settings
when it is handheld will not be affected.
To change a setting:
Connect the phone to the handsfree equipment.
Change the setting according to the instructions in the
chapters "Other Useful Features" or "Security" (the
Keylock setting).
The active flip can be temporarily disabled by pressing and
Note!
holding the side volume key while opening/closing the flip.