Measuring Blood Pressure - Silvercrest HealthForYou SBM68 Instructions For Use And Safety Notes

Configure the month using the + button. Press the SET
button to confirm.
6
Configure the day, hour and minute consecutively as
described above. Press the SET
each entry.
The Bluetooth
®
„On" or „Off" will flash at the same time.
Using the function buttons „-/+" choose whether you
want to activate („On" flashes) or deactivate („Off
flashes") automatic Bluetooth
SET button
6
If Bluetooth is activated („On") data transfer will begin
®
automatically after the measurement has been taken.
note: The battery life is reduced by transfer via
Bluetooth .
®

measuring blood pressure

note: To guarantee that you will be able to compare
values adequately, always measure your blood pressure
at the same time of day. Rest for approx. 5 minutes
before every measurement!
If you wish to undertake multiple measurements on the
one person, wait for 5 minutes between taking each
measurement.
You should not eat, drink, smoke or be active in the
30 minutes before each measurement.
Repeat the measurement process if the measured values
seem incorrect.
symbol will be shown on the display.
®
to confirm.
button to confirm
6
data transfer. Press the
GB/IE/NI 19