Advertisement
Installation Instructions - FOR SERVICE ONLY
6324-SR Soap Reservoir Rough-In Dimensions
Figure 1
Installation Instructions
Step 1: Connect filler tubing to reservoir
1. Assemble the filler components (cap, body,
nut and washer) to the Lav Deck as
shown in Figure 2.
2. Connect the male elbow to the reservoir
as shown in Figure 2.
3. Connect one end of the filler tube to the
male elbow on the soap reservoir and
secure the tube with the hose clamp pro-
vided (see Figure 2).
Step 2: Mount soap reservoir to wall
1. Install the hanger brackets to the wall at
the locations shown in Figure 1.
2. Place the soap reservoir assembly onto
the hanger brackets as shown in Figure 1.
3. Connect the other end of the 5/8" filler
tube to the male connector on the filler
assembly and secure the tube with the
hose clamp provided (see Figure 2).
Installation Instructions continue...
Bradley Corporation • 215-1304 Rev. B; EN 03-1101
Soap Reservoir for 3060 Series Lav Decks
Figure 2
8/11/03
6324-SR
3
Advertisement
