Fisher & Paykel GD75IA1 Installation Instructions Manual page 6

6. Connect the dishwasher drain hose to the dishwasher inlet
pipe on the waste disposer (fig. 6). Use a clamp to ensure a
tight seal. A stepped rubber adaptor (not supplied with the
product) may be required if the diameter of the drain hose
is larger than the diameter of the waste disposer's inlet
connection.
7. Connect the discharge elbow to the lower outlet on the
waste disposer (fig. 7).
8. Prior to connecting the waste disposer to the mounting
assembly, press firmly down on the rubber splash guard to
check that is firmly fitted onto the neck of the hopper.
9. Lubricate the top lip and angled surface of the rubber
splash guard with liquid soap or petroleum jelly (fig. 8 ).
Please do not remove clamp and
splash guard from hopper. Both
parts are factory installed and
installation ready.
https://producthelp.fisherpaykel.com/nz/Clean/Dishwashing_Accessories/GD75IA1/User_Guide_GD75IA1/02_Installation_instructions
Fig. 6 Connecting to a dishwasher (if required)
Fig. 7 Connecting the discharge elbow
Fig. 8 Lubricate the rubber splash guard
Updated: Fri, 01 Mar 2019 07:04:48 GMT
Powered by
6