Warranty; Agency Certification; Safety Certification; Electromagnetic Compatibility (Emc) - Seagate BARRACUDA XT SERIES SATA ST32000641AS Product Manual

2.10

Warranty

To determine the warranty for a specific drive, use a web browser to access the following web page:
support.seagate.com/customer/warranty_validation.jsp
From this page, click on the "Verify Your Warranty" link. You will be asked to provide the drive serial number, model number (or part
number) and country of purchase. The system will display the warranty information for your drive.
2.11

Agency certification

2.11.1

Safety certification

These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so marked as to the
certify agency.
2.11.2

Electromagnetic Compatibility (EMC)

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic
Compatibility Directive (2004/108/EC) as put into place 20 July 2007. Testing is performed to the levels specified by the
product standards for Information Technology Equipment (ITE). Emission levels are defined by EN55022, Class B and the
immunity levels are defined by EN55024.
Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives
when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed
for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all
unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE
marking for their products.
Barracuda XT Series SATA Product Manual, Rev. C 13