6.25. Remove the S-Board
1. Disconnect the coupler (S1).
2. Remove the screws (×2
frame.
3. Remove the screws (×2
6.26. Remove the stand brackets
1. Remove the plasma panel section from the servicing stand
and lay on a fiat surface such as a table (covered) with the
plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws (×5
each) and remove the stand brackets (left, right).
) and remove the S-Board metal
) and remove the S-Board.
TH-37PV600E / TH-37PX600B / TH-42PV600E / TH-42PX600B
6.27. Remove the GS-Board and SD-
Module
1. Remove the stand bracket R. (See section 6.26.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the coupler (G52).
4. Remove the screws (×3
5. Remove the SD card unit.
6. Remove the screws (×3
cover.
17
).
) and remove the SD card unit