Installation And Debugging; Tuning Webcam Image Mode; Tuning Laser Transmitter Image Mode - Acer Smart Touch Kit User Manual

Installation and debugging

Click "installation and debugging" menu
（1）Tuning Webcam Image Mode: The projection image which catched by camera will be showing in
software interface. Adjust the projection image into the red frame according to the camera debugging
requirement.
（2）Tuning Laser Transmitter Image Mode: In this mode, emitter emits a set of invisible laser film
4mm above the whiteboard, and the beam should be parallel with the whiteboard. The light spot size
should be not less than 9 pixels when you use finger to touch 4 corners.
19