How To Install - Hitachi SJ-P1 Series User Manual

Chapter 5
5.3.2

How to install

Before installing the P1-EN please refer to the
chapter 6 "Inverter Settings" and configure the
inverter.
For explanation purposes, it will be assumed that
the P1-EN is going to be installed in the SLOT1.
(1) Remove the cover of the option cassette
connection slot. Despite the removed cover
will no longer be needed, it is recommended
to keep it in a safe place. However the screw
that secured the cover will be used to secure
the P1-EN.
RJ45
VOP keypad
USB(micro-B)
(2) Attach this device. The slots 2 and 3 have one
more connection in the lower side. However,
the P1-EN will not need that connection.
RJ45
VOP keypad
USB(micro-B)
Option cassette connection slots
SLOT1 SLOT2
Option cassette connection slots
SLOT1 SLOT2
5-3
Installation and Configuration
SLOT3
Remove the screw and then
remove the cover.
The screw will be used later.
SLOT3
Attach the P1-EN to this
connection.