Display Temperature In The Cell; Turn On Backlight And Turn Off Tester - agratronix MT-PRO Operator's Manual

Grain moisture tester
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

DISPLAY TEMPERATURE IN THE CELL

1. To display the temperature in the cell, press either the up or down
arrow on the SELECT button (A) to index forward or backward through
the grain (function) menu until the word TEMPERATURE is displayed.
2. When TEMPERATURE is displayed, press TEST button (B). The
current temperature in cell will
be displayed in both F˚ and C˚.
Temperature will be displayed for a
few seconds then will return to the
main grain menu.
NOTE: If the tester and grain are
different temperatures, the mass of
the metal tester will quickly warm
or cool the grain. Therefore, the
temperature reading is the cell
temperature, not necessarily the
temperature of the grain before being
put in the cell.
TURN ON BACKLIGHT AND
TURN OFF TESTER
1. Press LIGHT button (A).
2. Press again to turn off backlight.
NOTE: The backlighting feature
is designed to improve display
visibility in low light conditions.
In bright light conditions, the
backlighting cannot be seen.
3. To turn off tester, press ON-
OFF button (B). Tester will
automatically turn itself off 2
minutes after the last button has
been pushed.
Operation
05-13

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MT-PRO and is the answer not in the manual?

Questions and answers

Table of Contents