Introduction - Sno-Way 22G100200 Installation & Owner's Manual

This manual was written for the assembly, installation and
maintenance of your
importantly, this manual provides an operating plan for
safe use. Refer to the Table of Contents for an outline of
this manual.
Please keep this manual with your machine at all times as
reference material and so it can be passed on to the next
owner if the machine is sold.
We require that you read and understand the contents of
this manual COMPLETELY, especially the chapter on
SAFETY, before attempting any procedure contained in
this manual.
The Society of Automotive Engineers has adopted
this SAFETY ALERT SYMBOL to pinpoint character-
istics that, if NOT carefully followed, can create a
safety hazard. When you see this symbol in this man-
ual or on the machine itself, BE ALERT!, your per-
sonal safety and the safety of others, is involved.
• Defined in the next column, are the SAFETY ALERT
messages and how they will appear in this manual.
FAILURE TO FOLLOW CAN RESULT IN INJURY
OR DEATH.
Information, that if not carefully followed, can
cause injury or damage to equipment!
NOTE: Additional information concerning the equipment
or the procedure that may or may not be contained else-
where in this manual.
BE AWARE! It is illegal to remove, deface or other-
wise alter the safety decals mounted on this equip-
ment.
Record the Power Pack Model Number, Power Pack
Serial Number, Controller Serial Numbers, Blade Model
Number, Blade Serial Number and the Pump Serial
Number in the space provided below as a handy record
for quick reference. The Power Pack Serial Number is
located on the A-Frame (driver's side near the front), the
Blade Serial Number is located on one of the middle ribs
of the blade. This plate contains information that your

INTRODUCTION

new Sno-Way plow. Most
WARNING
CAUTION
Dealer needs to answer questions or to order
replacement parts, if needed, for your unit.
NAME PLATE DATA
POWER PACK MODEL NUMBER
POWER PACK SERIAL NUMBER
(Located on A-Frame)
CONTROLLER SERIAL NUMBERS:
TRANSMITTER S.N.
RECEIVER S.N.
BLADE MODEL NUMBER
BLADE SERIAL NUMBER
(Located on Blade Frame)
PUMP SERIAL NUMBER
DEALER
NAME
ADDRESS
CITY STATE
PHONE ( ) –
ORIGINAL PURCHASER
NAME
ADDRESS
CITY STATE
PHONE ( ) –
We reserve the right to make changes or improve the
design or construction of any part(s) without incurring the
obligation to install such parts or make any changes on
any unit previously delivered.
Graphics and illustrations may be used which may show
equipment and/or options not included in every
installation without incurring the obligation to install such
parts or make changes on units previously delivered.
Sno-Way Service Parts Manuals are available on-line or
at your authorized Sno-Way dealer. Request part number
97101024 & 97101915 for the 22 Series Snow Plow.
Factory contact information
www.snoway.com.
(FILL IN)
ZIP
(FILL IN)
ZIP
(FILL IN)
is available at
2