Advertisement
User's Guide
Instructions for Installation and Operation
2.4 GHZ SPREAD SPECTUM REMOTE CONTROLS
Keyfob Transmitters
Models KTX24SS1
KTXW24SS3
KTX24SS2
KTX24SS3
Wall Mount
Models NTX24SS1
NTX24SS2
Remote Control Receiver w/Relays
Model RCR24SS-3R
Long Range Wireless Applications
This page intentionally left blank.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Applied Wireless KTX24SS
Summary of Contents for Applied Wireless KTX24SS
- Page 1 User’s Guide This page intentionally left blank. Instructions for Installation and Operation 2.4 GHZ SPREAD SPECTUM REMOTE CONTROLS Keyfob Transmitters Models KTX24SS1 KTXW24SS3 KTX24SS2 KTX24SS3 Wall Mount Models NTX24SS1 NTX24SS2 Remote Control Receiver w/Relays Model RCR24SS-3R Long Range Wireless Applications...
- Page 2 (one button on, one button off), or Relay #3 toggle modes. The receiver can quickly “learn” up to 60 Applied Wireless transmitters with different address codes. All keyfob transmitters come from the factory with a unique ID code. A receiver will only respond to the transmitter whose ID code has been “learned”.
- Page 3 24-VAC coil (AW PN 269006, 30A Momentary contactor). Toggle Latching For low voltage loads over 10 Amps, Applied Wireless offers internal 16A relay Unlatch with 1 No Connection option or high current relays (AWPN 269007, 30A 12VDC Relay) that can be Unlatch with 2...
-
Page 4: Instruction To The User
Receiver Package Information Models: KTX24SSn, KTXW24SSAn, NTX24SSn where n=number of channels FCC ID: UY124 “This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.” INSTRUCTION TO THE USER Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. ... - Page 5 Ordering Information Application Drawings NEMA Wall Matching Watertight Model Mount Frequency Keyfob Keyfob Number Transmitter (MHz) Transmitter Transmitter 2400- RCR24SS-3R KTX24SSx KTXW24SS3 NTX24SSy 2483 x=Number of buttons: 1, 2, or 3, y=1 or 2 Receiver Electrical Characteristics Parameter Unit Operating Voltage Range (AC or DC) Volts Operating Current, Unactivated Operating Current, Activated...
- Page 6 3 Way Switch Operation with Remote Control This page intentionally left blank...
-
Page 7: Not Covered
WHAT COVERED DURATION similarly alter products previously purchased. COVERAGE APPLIED WIRELESS, INC. AW warrants the product to be free from EXCLUSION OF INCIDENTAL OR 1250 Avenida Acaso, Suite F defects in materials and workmanship for one CONSEQUENTIAL DAMAGES Camarillo, CA 93012... -
Page 8: Troubleshooting Guide
Remove power from receiver for at least 5 seconds. Applied Wireless products are designed and manufactured with pride in the United States of America Copyright 2007 by Applied Wireless, Inc. All rights reserved. Specifications subject to change without notice. PPLIED...
Need help?
Do you have a question about the KTX24SS and is the answer not in the manual?
Questions and answers