Insignia NS-CSPGASP2 Quick Setup Manual

9 Do not defeat the safety purpose of the polarized or grounding plug. A polarized
plug has two blades with one wider than the other. A grounding plug has two
blades and a third grounding prong. The wide blade or the third prong is provided
for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched, particularly at the plugs,
outlets, and at the point where they exit from the apparatus.
QUICK SETUP GUIDE
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or table
Insignia Voice™
specified by the manufacturer, or sold with the apparatus.
When a cart or rack is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
Portable Speaker 13 Unplug the apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified personnel. Servicing is
required when the apparatus has been damaged in any way. Examples of
With Google
service-requiring damages include power supply cord or plug damage, liquids
being spilled or objects falling onto the apparatus, apparatus not operating
normally, and/or apparatus being dropped.
Assistant Built in
15 Do not install this equipment in a confined space, such as a book case or similar
unit, and make sure that it is well ventilated. The ventilation should not be impeded
by covering the ventilation openings with items, such as newspaper, table-cloths,
or curtains.
NS-CSPGASP2 / NS-CSPGASP2-C 16 WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus
to rain or moisture. The apparatus shall not be exposed to dripping or splashing and
objects filled with liquids, such as vases, shall not be placed on apparatus.
17 WARNING: The power adapter is used as a disconnect device. The disconnect
PACKAGE CONTENTS
device shall remain readily operable.
• Speaker
18 The equipment shall be used at a maximum of 95° F (35° C) ambient temperature.
• Power adapter
19 WARNING: Please refer to the information on the exterior bottom enclosure for
• Quick Setup Guide
electrical and safety information before installing or operating the apparatus.
20 The battery (battery or batteries of the battery pack) shall not be exposed to
excessive heat such as sunshine, fire, or the like.
FIND YOUR USER GUIDE ONLINE!
Go to www.insigniaproducts.com, enter
FEATURES
NS-CSPGASP2 in the search box, then press ENTER.
Next to Features, click Support & Downloads, then Google Assistant features
next to User Guide, click the language you want.
• Play and control music from your favorite services
• Set alarms, add items to your shopping list, learn about
your commute, and more
IMPORTANT SAFETY INSTRUCTIONS
• Tap into the power of Google to get real-time answers to
1 Read these instructions
your questions
2 Keep these instructions
• Link compatible smart-home products to turn off lights or
3 Heed all warnings
enjoy entertainment on your TV
4 Follow all instructions
5 Do not use this apparatus near water, for example, in a wet basement or near a Insignia Voice TM features
swimming pool.
• Wirelessly stream your music from any Bluetooth-enabled
6 Clean only with a dry cloth.
device to your speaker
7 Do not block any ventilation openings. Install in accordance with the
• Check the time, alarm, temperature, volume, and mode
manufacturer's instructions.
with the built-in display
8 Do not install near any heat sources such as radiators, heat registers, stoves, or
• Use outdoors and portably thanks to the built-in Li-ion
other apparatuses (including amplifiers) that produce heat.
battery and carrying handle
Before using your new product, please read these instructions to prevent any damage.
Control panel
FEATURE DESCRIPTION
• Quick hand wave (less than one second): Illuminates your buttons and
lowers the volume/snoozes your alarm
Proximity
• Hold hand over: Lowers brightness of all buttons
• Touch button: Raises button to full brightness
Google Assistant /
Microphone State
Back
Play/Pause
button
Carrying handle
Volume + /-
buttons
Power on/off
Microphone on/off
Factory reset
Power/Microphone
Front
status light
Time and alarm
Temperature /
Volume / Mode
Power Input
12V/2.5A
FEATURE DESCRIPTION
• Power • Short press (~1 second) to turn the speaker on, or turn the microphone on or
• Microphone off when the product is powered on.
on/off Note: The LEDs on the top of your speaker turn orange when the microphone is muted.
• Factory reset • Hold for four seconds, then release to turn your speaker off.
• Press for 12 seconds to reset the product.
Power/Microphone • Lights solid orange while charging
status light • Turns off when fully charged
• Blinks orange when the battery is low
Power input Plug in the power adapter to charge your speaker.
BUTTONS
DESCRIPTION
– +
× × × Press to lower your volume. Press and hold to decrease it quickly.
× × ×
Press to increase your volume. Press and hold to increase it quickly.
• Press quickly to play or pause your audio.
× × ×
• Hold for four seconds, then release to activate the Google Assistant.
Press to lower your display brightness. Press and hold to lower it quickly.
× × ×
Note: Use audio controls to completely turn off the display (for example, say "Hey
Google, turn off the display light. " ).
× × × Press to raise your display brightness. Press and hold to raise it quickly.
• Hold for four seconds to turn on Bluetooth mode and pair your device.
× × ×
• Press quickly to turn Bluetooth off.
• Hold for less than four seconds, then release to check you battery level.
× × × • Hold for more than four seconds, then release to turn proximity on or off.
The display shows Pon or Poff to let you know if proximity is on or off.
SETTING UP YOUR SPEAKER Bluetooth Set-up
This speaker is equipped with Bluetooth to allow wireless
1 Place your speaker in a convenient location.
playback from any Bluetooth-enabled phone or tablet.
2 Plug one end of the power adapter into a power outlet,
1 Press and hold - and + buttons for four seconds to enter
then plug the other end into your speaker.
Bluetooth pairing mode.
3 Press the power button on the back of your speaker to
turn it on. 2 Click "NS-CSPGASP2" or the device name you entered
during Google Home App setup on your device to pair
4 Make sure that your Wi-Fi, Location Services (GPS), and
with the speaker.
Bluetooth are turned on/enabled on your device.
3 After the speaker and your device are paired, you can
5 Make sure that the clock on your device is set to the
stream music from your device to the speaker.
correct time.
Notes:
6 Download and run the Google Home app on a phone or
• When your speaker is in Bluetooth-pairing mode, the display will
tablet to set up your speaker.
blink bt.
7 To use the Google Assistant, you must sign in to your
• When your speaker and Bluetooth-device are paired, the display
Google Account.
will show a solid bt.
For more help, visit g.co/home/setup.
• You can use voice commands to turn Bluetooth on or off. Try, "Turn
Bluetooth (on/off)."
Google Assistant • Your speaker will remember the last three devices that were
connected to it via Bluetooth and will automatically connect to one
Just start by saying "Ok Google" or "Hey Google," then ask it
of those devices when Bluetooth is turned on.
questions or tell it to do things.
Use these anytime:
Under battery power mode, the product automatically powers
• "Play some music"
off if there is no connection for 90 minutes.
• "Turn up the volume"
• "What's the weather like in Minneapolis?" TURNING PROXIMITY ON OR OFF
Your speaker also has some specific voice commands: This speaker is equipped with proximity detection that is
• "Turn screen (on/off)" turned on by default. When proximity detection is turned on,
• "Turn screen to __ percent" your speaker will temporarily decrease the volume of the
music or snooze your alarm when you wave your hand over
• "Turn display (on/off)"
your speaker. Turning off proximity detection will only turn
• "Turn display to __ percent"
off the volume decrease function.
• "(Increase/decrease) volume"
To turn proximity detection on or off:
• "Turn the volume (up/down)"
1 Hold all three buttons on the top of your speaker for more
• "Turn volume to __ percent"
than four seconds.
The LEDs on the top of your speaker are white while
2 Release all three buttons. The display shows Pon or Poff to
recording your question.
let you know if proximity is on or off.
Learn more about what your Assistant can do at:
http://assistant.google.com/discover/
SPECIFICATIONS
Note: The volume level increments by 10% when using voice
• Product dimensions (W × D × H): 5.6 × 5.6 × 9.02 in.
commands to increase or decrease volume.
(142.2 × 142.2 × 229.2 mm)
• Weight: 52.9 oz. (1500 g)
Google Chromecast built in
• Power input: 12V/2.5A
Follow the three steps below to enjoy this feature:
• Speaker wattage: 18W
1 Connect a phone or tablet to the same Wi-Fi network as
• Power cord length: 4.9 ft. (1.5 m)
your speaker using the Google Home App.
• Battery operating time: 5 hours (at 50% volume)
2 Cast podcasts, music, and more from 100+
• Battery charging time: 3.5–5 hours
Chromecast-enabled apps.
• Maximum ambient temperature: 95° F (35° C)
3 Tap the Cast button in a Chromecast-enabled app to play
music on your speaker.
TROUBLESHOOTING LEGAL NOTICES
Warning: Changes or modifications to this unit not expressly approved by the party
PROBLEM SOLUTION
responsible for compliance could void the user' s authority to operate the equipment.
No power • Make sure that your speaker is plugged in and turned on.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
• Make sure that your speaker is charged.
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses,
No sound or low • Make sure that your Bluetooth device is turned on, Bluetooth is turned
and can radiate radio frequency energy and, if not installed and used in accordance with the
volume in on, and NS-CSPGASP2 or the device name you entered during Google
instructions, may cause harmful interference to radio communications.
Bluetooth Mode Home App setup is selected.
However, there is no guarantee that interference will not occur in a particular installation.
• Turn up the volume on your speaker.
If this equipment does cause harmful interference to radio or television reception, which
• Turn up the volume on your Bluetooth device.
can be determined by turning the equipment off and on, the user is encouraged to try to
• Make sure that your Bluetooth device is not muted.
correct the interference by one or more of the following measures:
• Make sure that your speaker is not paired to another Bluetooth device.
—Reorient or relocate the receiving antenna.
• Make sure that your Bluetooth device is not paired to another
—Increase the separation between the equipment and receiver.
Bluetooth device.
—Connect the equipment into an outlet on a circuit different from that to which the
• Shorten the distance between your speaker and your Bluetooth receiver is connected.
Cannot establish device.
—Consult the dealer or an experienced radio/TV technician for help.
Bluetooth • Turn your devices off, then on. Re-pair your speaker and your
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
connection Bluetooth device.
two conditions: (1) this device may not cause harmful interference, and (2) this device
• Make sure that your speaker is not paired to another Bluetooth device.
must accept any interference received, including interference that may cause undesired
• Make sure that your speaker and Bluetooth device are both in pairing
operation.
mode.
RF Exposure Statement
• Make sure that your Bluetooth device supports Bluetooth v4.0 and
below. The device has been evaluated to meet general RF exposure requirement. The device can
be used in portable exposure condition without restriction.
• Make sure that your Bluetooth device is not connected to any other
device. Industry Canada Compliance
• Make sure that you have selected NS-CSPGASP2 or the device name
IC Statement
you entered during Google Home App setup on your Bluetooth device.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
My Bluetooth • Shorten the distance between your speaker and your Bluetooth
(1) this device may not cause interference, and
device keeps device.
(2) this device must accept any interference, including interference that may cause
unpairing • If the battery on your Bluetooth device is low, recharge the battery.
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
"NS-CSPGASP2" • Shorten the distance between your speaker and your Bluetooth
does not appear on device. radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
my Bluetooth • Put your speaker into pairing mode, then refresh your list of Bluetooth (1) l'appareil nedoit pas produire de brouillage, et
device devices. For more information, see the documentation that came with
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
your Bluetooth device.
brouillage est susceptible d'en compromettre le fonctionnement.
The device has been evaluated to meet general RF exposure requirement. The device can
My device cannot • Check the Wi-Fi settings on your device to make sure that Wi-Fi is
be used in portable exposure condition without restriction.
connect to Wi-Fi turned on.
le dispositif a été évalué à satisfaire l'exigence générale de l'exposition aux rf. l'appareil
• Make sure that you selected the right network and entered the correct
peut être utilisé dans des conditions d'exposition portatif sans restriction.
password.
- This Class B digital apparatus complies with Canadian ICES-003.
• Make sure that your router/modem is on and that you are within range
of it. - Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
• Turn your device off, then back on.
• Reset your router/modem.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
The app cannot find • Make sure that your device has power and is on.
the device • Make sure that your network is working properly.
CONTACT INSIGNIA:
• Make sure that your router/modem is on and that you are within range
of it.
1-877-467-4289 (U.S. and Canada)
• Make sure that the mobile phone has location setting enabled.
01-800-926-3000 (Mexico)
www.insigniaproducts.com
Note: If you try the solutions suggested above and still have
connection or operation issues, reset your speaker by pressing the
INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2018 Best Buy. All rights reserved. Made in China
Power button for 12 seconds.
V3 ENGLISH 17-0798