Download  Print this page

Cisco 561 Quick Reference Manual

With standard base for the ip phone cisco 8851, cisco 8851nr, cisco 8861, cisco 8865, and cisco 8865nr.
Hide thumbs
   

Advertisement

Cisco Headset 561 and Cisco Headset 562 with Standard Base
For the Cisco IP Phone 8851, 8851NR, 8861, 8865, and 8865NR
Call button
Volume button
High Sound Pressure—Avoid listening to high volume levels for long periods to
prevent possible hearing damage.
When you plug in your headset, lower the volume of the headset speaker before
you put the headset on. If you remember to lower the volume before you take
the headset off, the volume will start lower when you plug in your headset again.
Be aware of your surroundings. When you use your headset, it may block out
important external sounds, particularly in emergencies or in noisy environments.
Don't use the headset while driving. Don't leave your headset or headset cables
in an area where people or pets can trip over them. Always supervise children
who are near your headset or headset cables.
Incoming call
Blinking green
Active call
Steady green
Muted call
Steady red
0-5 Steady white LEDs
Current Charge
(based on charge level)
0-5 Blinking white LEDs
Charging Indication
(based on charge level)
0-5 LEDs light sequence
Upgrading Indication
Quick Reference Guide

Advertisement

   Related Manuals for Cisco 561

   Summary of Contents for Cisco 561

  • Page 1 Cisco Headset 561 and Cisco Headset 562 with Standard Base Quick Reference Guide For the Cisco IP Phone 8851, 8851NR, 8861, 8865, and 8865NR Call button Volume button Incoming call Blinking green Active call Steady green Muted call Steady red...
  • Page 2 4. Press Record and speak into the microphone. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list 5. Press Stop rec when you finish speaking.
  • Page 3 Note: This equipment has been tested and found to comply with the FCC Statement limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Any Changes or modifications not expressly approved by the party responsible These limits are designed to provide reasonable protection against for compliance could void the user’s authority to operate the equipment.

This manual also for:

562

Comments to this Manuals

Symbols: 0
Latest comments: