Advertisement
Adjusting the White Balance – Fully Auto
By Toggling between the A & B Presets
You switch the White Balance to either
Indoor (B) or Outdoor (A)
To set the White Balance Manually:
Press WHT BAL button, choose
between presets: B, A, Presets
As default these are:
B = 3200K – to use indoors with
tungsten lighting
A = 5600K – to use outside &
sunny blue sky
To make new Presets:
1. Set to A or B Presets.
2. Press the
button whist filling the frame with a white piece of paper or similar
that has the same lighting as your subject
3.
Adjusting the Brightness – Fully Auto Mode
Press the Left or Right arrows to adjust
the brightness of the picture.
Press the AE LOCK/4 button to lock focus
on your subject
Advertisement
