Advertisement
What If My HDTV Doesn't Have YPbPr Inputs?
How Do I Set Up Stereo Sound?
14
Most HDTVs include YPbPr connectors
for component video inputs, and your
Explorer 3270HD Set-Top includes a
YPbPr cable for these inputs.
If your HDTV has only RGB inputs, you
need a connection converter. Check with
To hear stereo sound, you must do one of
the following:
•
Connect audio cables from the AUDIO
OUT LEFT and RIGHT connectors on
the set-top to the AUDIO IN LEFT and
RIGHT connectors on your HDTV,
stereo receiver, or home theater.
•
Connect an RCA cable from the
DIGITAL AUDIO OUT on your set-top
to the DIGITAL AUDIO IN on your
HDTV (if equipped), stereo receiver, or
home theater.
the store where you purchased your set-top,
or order one from www.sciatl.com.
Your set-top will not display an HDTV
signal correctly on an SDTV, even if the
TV includes YPbPr inputs.
In addition, you may also connect an
S-Video cable from the S-VIDEO OUT
connector on the set-top to the S-VIDEO
connector on the HDTV or VCR. How-
ever, the S-Video connection does not
supply audio. You must also use audio
cables with the S-Video cable.
If you connect the set-top to your HDTV
using only the coaxial cable at the CABLE
OUT connection, your HDTV will not
receive stereo sound from your set-top.
Note: S-Video and coaxial cables only
deliver SDTV programming. They do not
deliver HDTV programming.
Advertisement
