Normal Operation; Transportation - EFOY ProEnergyBox 4060P User Manual

1. Introduction
1.3

Normal Operation

The EFOY ProEnergyBox may only be used in combination with 12 V batteries
installed in series or parallel that conform to the specifications of the EFOY
Pro Series fuel cells. The unit can be used according the specification for
stationary operations. Operate only with original-equipment EFOY fuel
cartridges.
Do not operate unit if housing is damaged.
For connecting solar panels to the EFOY ProEnergyBox please refer to the
solar charge controller user manual.
For detailed information to the EFOY Pro fuel cells please refer to the EFOY
Pro user manual.
The components in stand-alone systems do not have to be grounded – this is
not standard practice or may be prohibited by national regulations (e.g.: DIN
57100 Part 410: Prohibition of grounding protective low voltage circuits).
1.4

Transportation

Your new device was packaged to ensure that it reached you safely. All
materials used in the packaging are environmentally friendly and can be re-
used.
We recommend that you keep the packaging in case it is needed for further
use.
However, if you wish to dispose of the packaging, please help our planet by
disposing of it in an environmentally responsible way and in accordance with
the applicable local regulations.
Please note the instructions provided by SFC Energy AG when transporting the
device. For information on this, refer to our website or contact the EFOY
hotline. The contact details are provided in chapter 4.2 Service and
maintenance on page 17.
CAUTION!
Do not store, transport or install the mounted but disconnected EFOY Pro fuel
cell in the EFOY ProEnergyBox in temperatures below 0°C / 32°F
Ensure that no water can enter the EFOY ProEnergyBox, e.g. when changing
fuel cartridges.
7