Advertisement
Specification
Value
● Caller ID
Call Feature Support
● Call Waiting with Caller ID
● Cancel Call Waiting
● Call Conferencing (3-way calls)
● Configurable hook flash support
● Distinctive Ringing (Configurable for up to 11 ring patterns per phone line)
● Ring splash
● Stutter dial tone
● Off hook warning tone
● Open Switch Interval support to enhance answering machine compatibility
● Configurable star codes
● Euro/US hook-flash type
● Call transfer
● Message Waiting Indicator
● Warm Line
● Call Forwarding Unconditional
● Call Forwarding on Busy
● Call Forwarding No Answer
● Call return
● Redial Call
● Automatic redial
● Other call features available with compliant CMS or gateway
Telephone Ring Loading
Full 5 REN support on each phone line (10 REN total)
Ring Signal
Configurable balanced ring with configurable DC offset
Max Phone Line Distance
Supports up to 1000 ft of AWG26 wire (0.4 mm) on each phone line. Supports operation with
typical in-home telephone wiring
Country-Specific
United States, Japan, United Kingdom, Germany, France, Belgium, Netherlands, Finland, Italy,
Telephone Parameters
Switzerland, Sweden, Denmark, Brazil, ETSI 101 909-18
Supported
High Speed Data
Simultaneous Access
Bridged Ethernet and USB data ports
Cable Modem Access
Software based standby feature disables bridging to the WAN when enabled
Protection
Max CPE
Configurable up to 64 CPE devices (1 USB and 63 Ethernet)
RF Downstream
Input Frequency Range
Models other than DPC2203C2: 88 to 860 MHz
For DPC2203C2 only: 54 to 860 MHz
Tuner Frequency Range
88 to 860 MHz
Demodulation
64 QAM or 256 QAM
Maximum Data Rate
30 Mbps for 64 QAM and 43 Mbps for 256 QAM
Bandwidth
6 MHz
Operating Level Range
-15 to +15 dBmV
Input Impedance
75 ohms
RF Upstream
Frequency Range
5 to 42 MHz
5 to 55 MHz (Japan)
Modulation
QPSK
8 QAM
16 QAM
64 QAM
128 QAM TCM
Data Sheet
Page 6 of 16
Advertisement
