Operating Instructions - Kalorik JK 40770 Instruction Manual

OPERATING INSTRUCTIONS

Always remove the kettle from the power base (1) before filling it or
•
before any operation.
Open the lid (5) by pressing on the lid opening button (4) and fill the
•
tank with fresh water, paying attention not to fill under the minimum
mark or above the maximum mark indicated on the water gauge
of the kettle (8).
Close the lid by pressing it down until it you hear a click. Make sure it
•
closes correctly.
Make sure the spout filter is well in position, as else the auto-shut off
•
feature might not work.
Put the kettle onto the power base (1), plug into the wall socket,
•
and switch on using the digital control panel (3) on the handle.
To boil water: simply press on the "Boil" button (b) once, the water
•
gauge (8) will come on with a red color, indicating that the
appliance is operating.
To heat water at a selected temperature, press the temperature
•
setting button (c) repeatedly, until selecting the temperature you
want. The water gauge (8) will display a different color for each
temperature setting: green (140
yellow (175
LED light (a) will light on.
If the water gauge (8) does not come on, check if the kettle is
•
positioned correctly on the base, and check if the base is plugged
in.
Do not open the lid while the water is heating or boiling.
•
The cordless water kettle will switch off automatically when the water
•
boils (100
o
reached. A "beep" will sound indicating the temperature has been
reached and the kettle is switching off. However, you can stop the
appliance anytime by pressing the off button (b) or by lifting the
kettle from the power base.
CAUTION: Make sure that the lid is closed and the filter is correctly and
securely fitted before switching on the appliance. Failure to do so will
cause the kettle not to switch off!
www.KALORIK.com
F/80 C) and purple (195
o o
C/212 F) or when the selected temperature has been
o
F / 60 C), blue (160
o o
F / 90 C). The corresponding
o o
7
F / 70 C),
o o
JK 40770 - 170120