Alarm; On / Off; Volume; Adjust Sensitivity - ProLogic SNZ Instructions Manual

Bite alarm
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4
UK
volume, sensitivity adjustment and a wide but subtle night light with three different configurations.
Supplied with plastic protective covers, available as a complete set with receiver or as single
units. The receiver has a built-in light that can be turned on and off manually.

ALARM

• Totally waterproof
• Operates with one 9V battery
(not included)
• Sensitivity adjustment with dial roller
• Volume adjustment with dial roller
SNZ BITE ALARM – USER MANUAL
• BATTERY TYPE (alarm and receiver): 9V (MN1604 / 6LR61 / PP3)
• BATTERY VOLTAGE: 9V
• STANDBY CURRENT: 0.04mA
• WORKING CURRENT: 80mA
• WIRELESS TRANSMISSION TYPE: AM
• RADIO TRANSMITTER FREQUENCY: 433.92MHz
ALARM

ON / OFF

To turn the alarm ON press and hold '
3 seconds after this signal the alarm is ON.
To turn the alarm OFF repeat the same process until you hear another sound signal, now the
alarm is OFF.

VOLUME

In standby mode, turn ' V ' (7) dial roller to adjust the volume from level 0 (silent) to level 10
(loudest).
SELECT THE TONE
In standby mode, press ' T ' (6) to select your favourite of the 5 tone options.

ADJUST SENSITIVITY

In standby mode, turn ' S ' (3) to adjust the level of sensitivity. There are 5 different settings from
level 1 (maximum sensitivity), to level 5 (minimum sensitivity).
VISUAL BITE INDICATION
The SNZ alarm features a dedicated visual alert for both forward takes and drop back type bites,
allowing you to see which way the fish is travelling before you lift the rod. For forward takes, both
LEDs (1-5) will illuminate. For drop backs, the right LED (5) will flash intermittently.
NIGHTLIGHT
In standby mode, press ' N ' (2) once to activate the 'auto night light' function. Press twice to
manually activate the night light function. Press three times to turn off the night light completely.
LOW BATTERY ALERT
When battery power is low, the alarm will sound 3 bleeps when switched on. Ensure battery is
replaced immediately to ensure complete functionality of the alarm. When battery power reaches
a critical level, the unit will beep at intervals of 1 minute until the battery is replaced.
Manuale SNZ Alarm.indd 4
A new modern look and upgraded internal components have been used to provide
maximum reliability. The SNZ has all the features needed by modern carp angler: tone,
• Silent mode
• 7 tone settings
• Night light function
• 100dB speaker
• Protective cover included
• Low battery alert
' (6) button until you hear a sound signal.
30/06/16 16:55

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents