Adonit Writer Instructions For Use Manual page 6

Setting Up
Follow these steps to place your iPad in your Writer.
1. Open the Writer cover, and lay it flat on a level surface. Figure 1
2. Insert your iPad into the frame. Figure 2
3. Check that the iPad is properly aligned with the frame cutouts, and sits in
the frame securely.
4. Raise the iPad to the angle at which you want to work. Figure 4
5. Holding your iPad in place with one hand, use your other hand to position
the keyboard on the magnetic plate, until it is at an angle which supports
the frame and ensures it does not move. Figure 5
The magnetic plate keeps the Writer stable when it is set up. To hold your
iPad up when typing, there are magnets in the keyboard. Pull the keyboard
towards you, along the magnetic plate. When you feel the keyboard's
magnets holding on to the magnetic plate, you can move the keyboard back
and forth to adjust the viewing angle.
support@adonit.net | 4