Adonit Writer Instructions For Use Manual page 12

Resetting Your Bluetooth
Sometimes you may need to reset your Bluetooth settings and try pairing
again. Use the following steps.
1. Lift the keyboard so you can see the underside. Figure 1
2. Locate the on/off switch, and slide it to the 'off' position. Figure 2
3. On your iPad, navigate to Settings > General > Bluetooth, then turn on
Bluetooth.
4. Touch the small right arrow next to 'Adonit Writer', then touch 'Forget this
Device', and finally touch OK'.
5. Locate the on/off switch on the underside of the keyboard, and slide it to
the 'on' position.
6. Put the keyboard down again so you can see the top.
7. Press and hold the power button until it starts to blink (count to 10).
Figure 7
8. Complete the connection process again.
support@adonit.net | 10