SVS Prime Quick Start Manual

A B
Source & Preset Control
A
Rotate the knob to change the input. Press the knob to select a preset (after they
are programmed).
Front Panel Display
B
LED backlighting indicates the selected audio source (Wi-Fi, Bluetooth, Optical or
Auxiliary) and preset (1-6).
Play, Pause & Volume Control
C
Rotate the knob to adjust volume. Press the knob to pause/un-pause.
Welcome!
Congratulations on bringing home the SVS Prime Wireless Speaker, a
stunning achievement in sound quality and speaker versatility. We know you are
eager to start playing so this Quick Start Guide will walk you through the various
controls and connections and get you on the fast path to enjoying high-resolution
wireless streaming of your favorite playlists and music services.
Setting Up Wi-Fi
and the DTS Play-Fi App
Download Play-Fi App Download Play-Fi App
Search "Play-Fi" and download the free DTS
Play-Fi app to unlock the full functionality of
your SVS Prime Wireless Speakers.
Confi gure Play-Fi App Confi gure Play-Fi App
Open the Play-Fi app and follow the prompts to fi nish setting up
your Prime Wireless Speaker on your home Wi-Fi network.
C
Select "Set Up Play-Fi Choose "Set-Up" to
Device" confi gure your Speaker
and Wi-Fi network.
1 2
Included Accessories
Power Cord
Start Speaker Wi-Fi Setup Mode Start Speaker Wi-Fi Setup Mode
Once powered on, the speaker will automatically go into Wi-Fi
setup mode, indicated by a rapidly blinking yellow light on the
rear panel of the speaker. When the blinking light slows down,
the speaker is ready to connect. Wi-Fi connection is confi rmed
when yellow light remains on permanently.
Note: The speakers may require an update before letting you stream music. The Play-Fi app will show a notifi cation and
complete the update automatically. This is normal and can take 3-5 minutes.
If your SVS Prime Wireless speaker is not being discovered by the Wi-Fi network, try moving it closer to your router or to
a stronger signal area to establish a connection. Also, make sure the speaker and app are both confi gured to the same
Wi-Fi network in your home.
Enter your Wi-Fi network Choose a name for your Select new device name
password and select Prime Wireless Speaker. from Play-Fi menu.
"Next"
3 4 5
Once your speakers are set up, you can access music from your devices and your
favorite streaming services. You can also enjoy full resolution Critical Listening Mode
Critical Listening Mode, create a multi-room audio system, and more.
Connect Speaker to Wi-Fi Network Connect Speaker to Wi-Fi Network
iOS users must go to the "Settings" -> "Wi-Fi" and connect to
"PlayFiDevice..." like you would a normal Wi-Fi network.
Android users skip to step 4.
Create Custom Presets Create Custom Presets
Up to six presets are available for instant access to your favorite
streaming music channels, playlists and other content.
1. From the Play-Fi app, start the streaming service you want to
set as a preset.
2. Press the left control knob A to select which preset B you want to set (1-6). Each
press will move to the next preset.
3. When desired preset number is selected, press and hold the preset knob for three
seconds. The preset number will fl ash several times then stay on to confi rm, and
music will resume playing.
4. Follow instructions above for the remaining fi ve presets.
5. You can now access your favorite content by pressing the left knob to toggle through
your presets at any time.
To reset a preset, repeat the steps 1 - 5.
NOTE: It takes a few seconds for the preset to connect to music services from your Wi-Fi network. This is normal.
Select your favorite
streaming method/
service
6
Current services available as presets. More options coming soon, check svsound.com/products/prime-wireless for updates.