Table of Contents
Advertisement
C. Device Config
This page allows you to set certain hardware parameters on the printer.
Login Password
This allows the printer webpage password to be changed.
Units
Select between inches or millimeters. If you change units, do so before entering other settings.
Max Paper Speed
Possible values: 1.0 to 5.5 ips, Default = 5.0
When using labels or heavy paper stock, you may need to decrease the paper speed to prevent paper jams.
Mark Seeking
Possible values: Off*, Front, Rear, Gap. (Note: Rear and Gap are available only on 530siL models).
Set the value when using regular or label media with black alignment marks or label media with gaps between
the labels
www.printek.com
| P: 888.211.3400 | F: 269.925.8539 | E:
info@printek.com
16
Advertisement
Table of Contents
