Nac12 Inspection & Adjustment - Regal Raptor NAC12 Manual

Methods of inspection & adjustment
Notice: 1. included detecting in high speed in inspections
2. " ●"marks the executed time by requested, "○"marks the proposed time by manufactory
3."☆"marks parts needs to be replaced in periodic time, the time points to motorcycles in common running
not to some special cycles in special time
then it will be adjusted following the status of travlling changed
4. " high speed" and " in high speed" mark the speed reaches or over 80KM/ h
(inspection/adjustment/ item )
Steerin
g
handle bar
F. wheel
Steeting fork.w
Braking pedal
Sofe tube
Brake cup/ flume
Wheel & Brake
Caliper
Disc brake and
brake abrasion plate
brake liquid
Ignition device
battery
wiring
NAC12 Inspection & Adjustment
journey/ degree of tightness/ deflexion
operating rightness
steering angle in left or right
fork/brake piston status
damage
Deflexion of the fork/piston bearing deflexion
Pedal measure & mechanical status
Brake setup status
leakage/damage/install status
replace brake soft tube
liquid capacity
enginery/abrasion/damage
replace disc brake caliper , dustproof ring
rubber parts
gap between disc brake & brake attrition plate
brake attrition abrasion/harm
disc brake abrasion/damage
Replace brake liquid
spark plug status
replacing spark plug
jonit status of touch pot
joint part in loose or harm
inspection/adjustment time
since new
●
●
●
○ ●
○ ●
● ●
○
●
— 10 —
remark
●
●
●
●
●
●
●
●
☆ every 4 years
liquid level
:
●
R-wheel: between max. and min. limited.
☆ every 2 years
●
●
●
thickness standard
F-wheel 4mm R-wheel 4mm
usage limit
F-wheel 3mm R-wheel 3mm
per year
●
electrode gap of spark plug: 0.6-0.7mm
per 5000KM
●
●