Pairing Sensor Units - Labino Apollo 1.0 Operating Instructions Manual

3. PAIRING SENSOR UNITS

The Sensor and the Hand Unit are paired by the factory. Only one Hand Unit
and one Sensor Unit can be paired at one time. In case of a double kit, the Sensor
Unit and the Hand Unit can be paired manually.
a) Select SENSOR UNITS in the main menu.
b) You see a submenu that looks like this
D588647BB843
NEW SENSOR
<<<
The first line shows the unique ID of the Sensor Unit (12 characters, always
starting with a letter) that is currently paired with the Hand Unit. The ID is
printed on the label on the back side of the Sensor Unit.
c) Select NEW SENSOR. The Hand Unit it now disconnecting from the old
Sensor Unit and the display reads "Scanning ...".
d) Switch on the Sensor Unit you want to pair with.
e) A list of available Hand Units appears on the screen.
f) Select the desired Sensor Unit and press "Enter".
g) Return to the measuring screen by either pressing <<< twice or by pressing
the "Peak" button once.
9