Table of Contents
Advertisement
b) Turn on the Sensor Unit by pressing the "Power On" button. The LED will
flash once to confirm (see Figure 2). Note that the Sensor Unit will turn off
automatically after 30 s if no connection to the Hand Unit was established or
if the Hand Unit was switched off. In these cases, the LED flashes twice.
Figure 2. Sensor Unit
LED
c) The Hand Unit and Sensor Unit will now connect. A progress bar indicates
the connection process (see Figure 3).
Figure 3
Progress bar –
Bluetooth connection
d) Once the connection is established, you will see the measuring screen that
shows the UV-A intensity in µW/cm² as measured by the UV-A sensor of the
Sensor Unit and the white light illuminance in lux as measured by the VIS
sensor.
UV-A
Sensor
VIS
Sensor
Power On
5
Hide quick links:
Advertisement
Table of Contents
