The Peak Function; The Hold Function - Labino Apollo 1.0 Operating Instructions Manual

d) Return to the measuring screen by either pressing <<< twice or by pressing
the "Peak" button once.
e) If no key has been pressed within 1 min, the Hand Unit will automatically
return to the main menu.

2.6 The peak function

After the "Peak" button is pressed while you are on the measuring screen, the
Hand Unit shows the largest measured value since the button was pressed. A
small triangle can be seen in the display (see Figure 5). To deactivate the peak
function, press the "Peak" button again.
Figure 5

2.7 The hold function

After the "Hold" button is pressed while you are on the measuring screen, the
Hand Unit will show the latest measured value and does not change. A small
"H" can be seen in the display (see Figure 6). To deactivate the hold function,
press the "Hold" button again.
Figure 6
8
Peak function
activated
Hold function
activated