Silvercrest SMW 900 EDS C6 Operating Instructions Manual page 23

Programming the cooking time
After you have selected the power level, programme in the desired cooking time:
■ Turn the control dial r
The increments for setting the time with the control dial r
–
from 0 sec to 5 min: in 10-second increments
–
from 5 to 10 min: in 30-second increments
–
from 10 to 30 min: in 1-minute increments
–
from 30 to 95 min: in 5-minute increments
Aborting/stopping an input process
Press the stop button e
reverts to standby mode .
Starting the cooking process
When you have set the power and cooking time, you can start the cooking pro-
cess: To start the cooking process, press the start/quick start button r
microwave symbol
down . When the set time has elapsed, "End" and "Hot" will appear alternately in
the display 1 . You will hear a series of beeps .
Quick start function 1
In standby mode, turn the control dial r
cooking time . Start cooking at 900 W by pressing the start/quick start button r
Quick start function 2
With this function, you can start cooking immediately for 30 seconds (or longer,
up to 95 minutes) at 900 W .
■ Press the start/quick start button r
and "00:30" appear on the display 1 . The microwave starts the cooking
process for 30 seconds . The time starts counting down .
If you wish to cook for longer than 30 seconds, press the start/quick start
button r
The time increments are set as follows:
–
from 30 sec to 5 min: in 30-second increments
–
from 5 to 95 min: in 1-minute increments
■ 20 │ GB │ IE │ NI
, until the desired cooking time has been set .
once to cancel and end the input . The appliance
appears on the display 1 . The programmed time counts
repeatedly until the desired time is reached .
are as follows:
to the right and set the required
once . The microwave symbol
SMW 900 EDS C6
. The
.