Preparing the appliance
■
Remove the packaging material and the protective films from the panel and
the door opener button 3 .
CAUTION – PROPERTY DAMAGE!
■
Insert the plug into a mains power socket . There will be a beep and the
display 1 lights up . Use a 230–240 V ~ , 50 Hz, mains power socket with
a 16 amp fuse . It is recommended that the microwave oven is powered from
its own power circuit . If you are unsure about how to connect the microwave
oven, consult a specialist .
■
Before the first regular usage of the microwave oven the appliance must be
heated up to remove any remaining production residues .
■
After inserting the mains plug into the socket, open the microwave door once
by pressing the door opener button 3 .
Switch the appliance on in Grill mode without any food or accessories (turntable 4
and grill stand t):
NOTE ON HEATING UP FOR THE FIRST TIME
Only operate the microwave without food or acces-
►
sories when heating up for the first time .
Operate the microwave for a maximum of 5 minutes
when empty!
1) Press the Grill button 7
2) Turn the control dial r
on the display 1 and confirm your choice by pressing the start/quick start
button r
3) Use the control dial r
4) Press start/quick start r
■
16
│
GB │ IE │ NI
Do not remove the light grey mica cover plate, which
is mounted inside the cooking chamber to protect the
magnetron .
. "Gr 1" appears on the display 1 .
, until "Gr 3" and the
.
to set a cooking time of 5 minutes .
to start the grilling process .
and
symbols appear
SMW 900 EDS C6